[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: problem in modelling in design builder software/



see DB knowlegebase. There's an article on exactly this.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, kulandhaivel muthusamy <kulandhai_psna@...> wrote:
>
> Hi All             I modeled a building in Design Builder and transfered it into EnergyPlus and simulated. After simulation i got lot of errors like
> ** Warning
> ** CAUTION -- Interzone surfaces are usually in different zones
> 
>    **  
> ~~~   ** Surface=P_3487_72_0_0,
> Zone=3487
> 
>    **   ~~~  
> ** Surface=P_3487_64_0_10018, Zone=3487
> can anyone know what to do. I just imported a DXF file from AUTOCAD and extruded it to form zones. Do anyone know how to create zones correctly in design builder or is there any procedure we have to follow in design builder to create zones.
> Thanks in advance
> Regards
> KULANDHAIVEL
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/