[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Parametric study

I am not familiar with JEPlus yet, but I have used GenOpt and found it relatively easy to use.  You can find it at : http://eetd.lbl.gov/eetd-software-genopt.html   


The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653


From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Diogo Cortez Alves
Sent: Friday, March 19, 2010 11:25 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Parametric study



Dear E+ users

I´m trying to understand the influence of the ventilation in the energy and rate needs of a certain .idf file.

I have already use the field Parametric:SetValueForRun for the variable I want, and obtained the correspondent files (eso, table, etc...) for all the runs.

Trying to make my work easier, I tried to find a program that collected only the data I wanted, and fond Dr. Yi JEPlus in this wonderful forum. Unfortunately, my knowledge in programming and that kind of stuffs is very small, and quickly I have give up...

Is there any other program more easy to manage, not considering of course that Dr. Yi´s program is complicated (the problem is all mine!), that just "picks up" the 4 values that I want?

Thanks a lot

Have a nice weekend

Diogo Cortez Alves


The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe