Hi Dashamir,
Thank you very much. I'll take a detailed look at it.
In the meantime, I managed to do what I wanted with the electric radiant floor heating.
Thank you again,
José
On 9 April 2010 11:08, dashamir marini
<dashamirmarini@ yahoo.com> wrote:
Hi JosÃ?
Yes, I have modeled one example with a radiant floor heating system, check attached file.
Let me know if every thing is clear to you.
good luck
Dashamir
--- On Fri, 4/9/10, tincandanedo2004 <tincandanedo@ gmail.com> wrote:
From: tincandanedo2004 <tincandanedo@ gmail.com>
Subject: [EnergyPlus_ Support] Simple example with radiant floor heating - HVAC Plant as simple as possible
To: EnergyPlus_Support@ yahoogroups. com
Date: Friday, April 9, 2010, 6:59 AM
Does anybody have a simple IDF example with a radiant floor heating system? I managed to create the surface with internal heat generation, and the Radiant low temperature constant flow system. However, I am having problems with the connections between components.
The available examples with names like RadLoHydr, etc. are good, but I just want to study the temperature response to the heat input in the floor. I don't mind too much about the HVAC system configuration. I am trying to use the District Heating module, but I'm still struggling with it.
Thanks,
Jos�©
|