[EnergyPlus_Support] delta T and enthalpy (regarding airflow network)

["vesthetics" <vesthetics@xxxxxxxxx>]

I have two questions 

First,

I should input delta T and enthalpy 
in Airflow network : multizone :surface

default delta T is o in lower limit and 15 in upper limit

but, I'm not sure that is fit value.

I'm trying to find out some reference, is there any reference for it?

and in Korea, summer, humidity is high so network should be controlled with enthalpy but I can not find any reference in EnergyPlus reference.



Second,

Airflow network : multizone :zone
and
Airflow network : multizone :surface
There is ventilation control mode in each object.
Which is dominent when two object are filled ??

Thanks




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/