Re: [EnergyPlus_Support] Error caused by holes?

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

sounds like you are running in DesignBuilder?

Perhaps you should ask on their forum.  In any case, without seeing
the IDF, I can't help you.  (And support questions and files should
be directed to energyplus-support@xxxxxxxx -- the helpdesk).

At 05:44 AM 5/5/2010, greenbuild15 wrote:
> I am simulating a multi-story
> building.
>
> If I try to run all 3 floor at the same time, I get a series of error
> messages like:  "Error getting other opening (hole)
> id:F_1610752_0_0_10061"
>
> I can run floors 1 and 2  and 1 and 3 together, but not all at the
> same time.  Note: All interior doors are modelled as holes in order
> to use data for further CFD analysis.
>
> I have not been able to track down the problem area because I cannot find
> any match to the error message data in the IDF file.
>
> Does anyone know how to track down the problem?
>
> Thanks in advance.
>
> Francois

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___