[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] corner sub-surfaces





Search on "composite wall" or "composite constructions" for a concept.  Otherwise, you'd separate the wall into multiple piece.

At 06:10 AM 5/7/2010, R- Theru wrote:


Hi,
I've got a question concerning Design Builder, but I guess one might also come across a similar problem in EnergyPlus.
I'm trying to simulate an external wall in a building, defining reinforced concrete as its sub-surface to simulate the structural columns. How would I simulate a corner column, given that if sub surfaces are defined at the edge of each one of the joining walls, the result is two separate sub-surfaces with a wall material (ie brick) join, as seen on the image below?
It looks like the wall thickness is not taken into account when modeling surfaces.


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___