Dear E+ users,
Does anyone know any project/research related to develop a interface for
EnergyPlus to be used in Building Informtaiton Modelling (BIM) or to develop
IFC converters to EnergyPlus?
Thanks for any help.
Regards,
Alberto Hernandez Neto
----- Original Message -----
From: "Mário" <mneves32@xxxxxxxxx>
To: <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Friday, May 28, 2010 5:48 AM
Subject: [EnergyPlus_Support] Re: One thermostat; multiple zones
Hello
Hers an idea:
1- run the simulation with only the zone of the control;
2- take the control zone tempreture and schedule it to the other zones and
run the simulation again.
Problems:
Yes, you lose the influce of adjacente, heated, zones on your control zone,
but I don´t thinck it´s to significant.
Best Regardas
MN
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx,
"Liam O'Brien" <liambrn@...>
wrote:
>
> I'm modeling a house, in which I want to have multiple zones, whose
> temperature is controlled by a single thermostat (as typically implemented
> in reality). So in other words, heating would not be added to ANY of the
> zones unless the thermostat in one of the zones is below the heating
> setpoint. Can this be accomplished using an ideal loads system or do I
> need to move towards the explicit HVAC domain?
>
> Also, is there a way of setting the maximum heating/cooling capacity using
> an ideal system?
>
> Thanks in advance.
>
> Liam O'Brien
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a
high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the
Documentation link and press the "search" button.
Yahoo! Groups Links