[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Interface EnergyPlus and BIM





As far as I know CYPE interface can import BIM files and then export it to Energy+

 

Josep Solé
URSA Insulation S.A
- URALITA
European Sustainibility & Technical Manager 
Móvil +34 606 42 32 14

www.ursa.es

www.ursainsulation.com

www.uralita.com

 
P URALITA / URSA se compromete con el ahorro de energía. Antes de imprimir este mensaje asegúrese de que es necesario.


Aviso de confidencialidad
Este mensaje contiene información que puede ser confidencial y de uso restringido. Si usted no es el receptor deseado del mensaje (ni está autorizado a recibirlo por éste) no está autorizado a copiar, reenviar, o por otra parte, divulgar el mensaje o su contenido a cualquier otro. Si ha recibido este mensaje por error, por favor, notifíquenoslo inmediatamente y bórrelo de su sistema.


De: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] En nombre de Drury B Crawley
Enviado el: viernes, 28 de mayo de 2010 16:07
Para: mike barker
CC: EnergyPlus_Support@xxxxxxxxxxxxxxx
Asunto: Re: [EnergyPlus_Support] Interface EnergyPlus and BIM

 

 

At Bentley, we are very aware of the issue of quality of transfer and obtaining accurate space boundaries from the BIM for energy simulation. We are explicitly working to obtain certification of the IFC2x3 Coordination View v2.0 for our products.  Also, we are creating a plugin for Revit to be to review and control the quality of the data transferred to our energy simulation products.  We anticipate having a beta of our new simulation program out in the next month or two.


Dru

On Fri, May 28, 2010 at 9:46 AM, mike barker <mike@mikebarker.co.za> wrote:

Benjamin Welle of Stanford University spoke recently at the ASHRAE 2010
Winter Conference and his comments are of interest, especially those about
space boundaries for energy analysis and the Geometry Simplification Tool.

It appears we need to ask about more than just interfaces and conversions ?

Perhaps we need to ask about the "quality" of the conversion, where quality
could be established by adherence to validation processes such as those
spelt out by the "GSA Building Information Modeling Guide Series 02 -
Spatial Program Validation" ?

Could we ask the Software Vendors to comment on this aspect of conversion,
and how they are working with these sort of issues?

  Thanks,
      Mike Barker
      mike@mikebarker.co.za
      +27 (0) 83 627 7673
      skype  mike.barker.mba




-----Original Message-----
From: EnergyPlus_Support@yahoogroups.com
[mailto:EnergyPlus_Support@yahoogroups.com] On Behalf Of alberto
Sent: 28 May 2010 10:28
To: EnergyPlus_Support@yahoogroups.com
Subject: [EnergyPlus_Support] Interface EnergyPlus and BIM

Dear E+ users,

Does anyone know any project/research related to develop a interface for
EnergyPlus to be used in Building Informtaiton Modelling (BIM) or to develop

IFC converters to EnergyPlus?

Thanks for any help.

Regards,

Alberto Hernandez Neto



------------------------------------



 



__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___