Dear Greg,
Itâ??s very possible! Iâ??m completing a model which uses the Heat Exchanger in the configuration shown on the schematic, and it is working well. My particular model does not use 100% OA, but I think all youâ??ll need to do is set up the Controller:OutdoorA ir object to have a minimum fraction which is always = 1 (something like what Iâ??ve shown below).
p.s., The example files are helpful, but you have to wade through all of the node names to figure out whatâ??s connected to what. I always make a schematic to help keep them straight.
|
Controller:OutdoorA ir |
Name |
OAController_ Aquatics |
Relief Air Outlet Node Name |
NodeOut_EA_Aquatics |
Return Air Node Name |
NodeIn_RA_Aquatics |
Mixed Air Node Name |
NodeOut_MA_Aquatics |
Actuator Node Name |
NodeIn_OA_Aquatics |
Minimum Outdoor Air Flow Rate |
2.50132 |
Maximum Outdoor Air Flow Rate |
13.21452 |
Economizer Control Type |
FixedDryBulb |
Economizer Control Action Type |
ModulateFlow |
Economizer Maximum Limit Dry-Bulb Temp (C) |
29.4 |
Economizer Maximum Limit Enthalpy (J/kg) |
82939 |
Economizer Maximum Limit Dewpoint Temp (C) |
MT |
Electronic Enthalpy Limit Curve Name |
MT |
Economizer Minimum Limit Dry-Bulb Temp (C) |
-40 |
Lockout Type |
NoLockout |
Minimum Limit Type |
FixedMinimum |
Minimum Outdoor Air Schedule Name |
|
Minimum Fraction of Outdoor Air Schedule Name |
SchCpct_AlwaysOn |
Maximum Fraction of Outdoor Air Schedule Name |
SchCpct_AlwaysOn |
Mechanical Ventilation Controller Name |
|
Time of Day Economizer Control Schedule Name |
|
High Humidity Control |
|
Humidistat Control Zone Name |
|
High Humidity Outdoor Air Flow Ratio |
|
Control High Indoor Humidity Based on Outdoor Humidity Ratio |
|
Heat Recovery Bypass Control Type |
It is contradictory to insist that future generations respect the natural environment when our educational systems and laws do not help them to respect themselves. (Let's do both.)