RE: [EnergyPlus_Support] Re: Separating fan energy during heating and cooling

["Griffith, Brent" <brent.griffith@xxxxxxxx>]

Its hard to tell.  I think others have had success with custom output variables working in summary tables.  Check the error file for messages about tabular reporting problems. 

 

---

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of crush_3k
Sent: Thursday, June 17, 2010 3:59 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: Separating fan energy during heating and cooling

 

 

Thank you, that worked well. However, when I try to extract the monthly summed values for the fan during the heating or cooling mode, '0.0' shows up in the monthly table for all months in the table.csv file. These values show up correctly in the .csv file for each timestep. Am I missing something?

Thank you,

Vrushali

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Griffith, Brent" <brent.griffith@...> wrote:
>
> This sort of thing can be done with Energy Management System feature. It is a bit of an advanced feature but EMS allows you to create custom output variables and do many kinds of post processing inside the program.
>
> ________________________________
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of vrushali mendon
> Sent: Thursday, June 17, 2010 8:19 AM
> To: energyplus_support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Separating fan energy during heating and cooling
>
>
>
> Hello,
>
> I need to separate the fan energy during the heating and cooling mode to get the true heating and cooling energy consumption. Is there a way to set it up during the simulation itself rather than post processing in a spreadsheet as mentioned elsewhere on the forum?
>
> Thank you,
> Vrushali
>

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___