[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Separating fan energy during heating and cooling

There are no errors about this the in err file. Interestingly, when the aggregation option in the monthly table object is set to 'HoursNonZero', values show up in the summary table; when this option is set to 'SumOrAverage',zeros show up. The monthly values show up fine in the .csv file though (through the output:variable option)

Thanks,
Vrushali

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Griffith, Brent" <brent.griffith@...> wrote:
>
> Its hard to tell.  I think others have had success with custom output variables working in summary tables.  Check the error file for messages about tabular reporting problems.
> 
> ________________________________
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of crush_3k
> Sent: Thursday, June 17, 2010 3:59 PM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] Re: Separating fan energy during heating and cooling
> 
> 
> 
> Thank you, that worked well. However, when I try to extract the monthly summed values for the fan during the heating or cooling mode, '0.0' shows up in the monthly table for all months in the table.csv file. These values show up correctly in the .csv file for each timestep. Am I missing something?
> 
> Thank you,
> 
> Vrushali
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com>, "Griffith, Brent" <brent.griffith@> wrote:
> >
> > This sort of thing can be done with Energy Management System feature. It is a bit of an advanced feature but EMS allows you to create custom output variables and do many kinds of post processing inside the program.
> >
> > ________________________________
> > From: EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com> [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx<mailto:EnergyPlus_Support%40yahoogroups.com>] On Behalf Of vrushali mendon
> > Sent: Thursday, June 17, 2010 8:19 AM
> > To: energyplus_support@xxxxxxxxxxxxxxx<mailto:energyplus_support%40yahoogroups.com>
> > Subject: [EnergyPlus_Support] Separating fan energy during heating and cooling
> >
> >
> >
> > Hello,
> >
> > I need to separate the fan energy during the heating and cooling mode to get the true heating and cooling energy consumption. Is there a way to set it up during the simulation itself rather than post processing in a spreadsheet as mentioned elsewhere on the forum?
> >
> > Thank you,
> > Vrushali
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/