[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Define thermostat control

I have trouble defining air conditioners, imagine we have three areas (area A, area B, area C), and an air conditioner, air conditioning equipment air-conditioned areas A and B (so this is an area 1 and the area C is another zone 2), it is assumed that the thermostat control should be in zone 1. But in the case that the control thermostat is in zone 2 (area C) where there is no air conditioner, what object in the IDF file must be defined to make the control thermostat is in Zone C?

What I mean is that I do not know how to define a hvac where the thermostat control is not in the area that the HVAC air-conditioning, but is in another area where there is no air conditioning this air-conditioned area.

Thank you very much.
Atte. Pablo Cartagena.



Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe