Check your SimulationControl object, the 5th
field needs to be set to “Yes” to actually simulate the RunPeriod.
From:
Sent: Tuesday, July 06, 2010 3:10
PM
To:
Subject: [EnergyPlus_Support] Re:
Trouble displaying summaries using Output:Table:SummaryReports
I have both a RunPeriod and a SizingPeriod in the
simulation. I need the SizingPeriod because the HVAC system does zone sizing to
autosize the air ducts in each of the rooms. I also wanted to change the sizing
period to run the simulation for a few days rather than an entire year -- but I
could probably do that with the RunPeriod as well?
So, I have both RunPeriod and SizingPeriod objects. Is it possible to get
meaningful results in the HTML Output Table while using both?
Thanks so much for your help!
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx,
>
> You need to use a runperiod for these to show.
>
> Not any of the sizingperiod:* objects will show in these summaries.
>
> At 02:12 PM 7/6/2010, jpp349 wrote:
> >I tried this with a sizing period of just a few days, and another of
> >an entire year, and I got the same kind of results for both.
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___