[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] New and learning

After several years of following, I finally get to try the software out (Version  I am using AutoCAD MEP 2010 (not Revit) to generate a gbXML file.  I then run it through AutoDESK's Green Building Studio website.  From the website, I can export to an idf file.  I then than the translate program to verify that the idf is per version 5.  I run the simulation and it goes through, one major error.  I try to import into the idf file generator, and I get an e-mail saying that it failed.

My model is a simple Amtrak car with guessed geometry, people loads, etc.  All values were input into MEP.  I am trying to get an output for the cooling load.  Any help would be appreciated.



Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: