[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Adding a hot water system



I am trying to model a water heater system for a Commissary, but the values I am receiving for the supply are astronomically large compared with the expected results.  I know that my peak flow rate is .019 m^3/second and have added this to the idf file but I continuously get output results suggesting that my building uses 600,000 m^3 annualy which seems grossly unreasonable.  Can anyone send me a sample idf file for a water heater that shows how to properly input this type of system because I cannot seem to get a reasonable output with my limited knowledge of this program.  I have also attached my idf file in case someone can spot where I am making an error.
 
Thanks,
 
Matt Youngblood



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\Commissary[Test1].idf