Hello all,
Is it possible to run a building simulation for a month or year
and then view the duty cycle data (e.g. on 40% of the time, off 60% of the
time, etc) for the DX cooling coils on an hour-by-hour basis?
Regards,
Max
From:
EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On
Behalf Of crush_3k
Sent: Thursday, August 05, 2010 6:20 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] DHW system pipe network
Hello all,
I am trying to model heat loss through a domestic hot water pipe system.
Essentially, I am trying to model different lengths of hot water piping going
to different end uses.
The E+ I/O reference states that heat transfer cannot be modeled on the demand
side due to simulation constraints (I also got an error when I tried to use the
pipe:indoor object in the network which worked fine with the pipe:adiabatic
object).
Is there a way to model this?
Thanks,
Vrushali
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___