The schedules can be set up to behave differently during the
sizing. Often this can be used to schedule the energy measures off or
unavailable during sizing so their effect is not present.
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of diorthotis
Sent: Friday, August 06, 2010 3:10 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] system sizing data transfer
Hello,
I run a system sizing and yearly simulation for two similar models (the only
difference between them is that the one has some extra energy saving measures
such as Daylighting Controls). The system sizing gives of course different
results.
Is there a way to simulate the second system with the same sizing results as
the first one? I know I can transfer the sizing data manually (but there is
quite a lot of work). Is there a way to do it automatically?
Regards,
Fotis
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___