Oh sorry, you are right, that object doesn’t have a
schedule. I’ll try to add that as a suggestion for a future
version.
I can think of various work-arounds using EMS (but they may be
more advanced than copying over the sizes). For example you could actuate
OtherEquipment to make up the missing load from the dimmed lights. Or you
could intervene directly with the sizing results using the system sizing actuators.
From:
EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On
Behalf Of Max Melatos
Sent: Monday, August 09, 2010 3:15 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: system sizing data transfer
Ok, this is smart, maybe it is the solution to
my problem.
But still I can't make it work for Daylighting:Controls. This object does not
seem to be controlled by a schedule.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx,
"Griffith, Brent" <brent.griffith@...> wrote:
>
> The schedules can be set up to behave differently during the sizing. Often
this can be used to schedule the energy measures off or unavailable during
sizing so their effect is not present.
>
>
>
> From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
On Behalf Of diorthotis
> Sent: Friday, August 06, 2010 3:10 AM
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Subject: [EnergyPlus_Support] system sizing data transfer
>
>
>
> Hello,
>
> I run a system sizing and yearly simulation for two similar models (the
only difference between them is that the one has some extra energy saving
measures such as Daylighting Controls). The system sizing gives of course
different results.
>
> Is there a way to simulate the second system with the same sizing results
as the first one? I know I can transfer the sizing data manually (but there is
quite a lot of work). Is there a way to do it automatically?
>
> Regards,
>
> Fotis
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___