[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Outdoorairunit chilled water flow error





Dear E+ Support,

 

I am simulating an outdoor air unit supplying fresh air to a gymnasium space served with fan coils. The simulation crashes during sizing and I am getting the following error message:

 

  ** Severe  ** ControlCompOutput:ZoneHVAC:OUTDOORAIRUNIT:FF GYM OUTAIR, Min Control Flow is > Max Control Flow

   **   ~~~   ** Acuated Node=FF GYM OAUCHWINLETNODE MinFlow=[0.000], Max Flow=-99999026.770

   **   ~~~   **  During Sizing, Environment=MULTIUSE HALL, at Simulation time=01/15 24:00 - 24:10

 

The simulation was working fine in a typical one zone model.  I cant understand how to solve this. If you can please review the attached .idf file for possible solutions.

 

Thanks for your help

 

Sonal



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\MUH design case expidf2.idf