Hi, Julian
You have many errors so I shall try to explain some of them below with your error message text.:-.
Program Version,EnergyPlus 5.0.0.031, 20/08/2010 02:09 a.m.,IDD_Version 5.0.0.031
** Warning ** CheckEnvironmentSpecifications: SimulationControl specified doing design day simulations, but no design environments specified. No design environment results produced.
You have asked for design day simulation, but there is no DesignDay Object in the IDE. You can copy them from the .ddy that came with the weather file
** Warning ** No reporting elements have been requested. No simulation results produced.
** ~~~ ** ...Review requirements such as "Output:Table:SummaryReports", "Output:Table:Monthly", "Output:Variable", "Output:Meter" and others.
You need to ask for some output variable to report.
** Warning ** Weather file location will be used rather than entered Location object.
** ~~~ ** ..Location object=SANTA MARIA DE OLOT
** ~~~ ** ..Weather File Location=bilbao.met - - DOE-2 WTH-- WMO#=-
** ~~~ ** ..due to location differences, Latitude difference=[1.43] degrees, Longitude difference=[4.96] degrees.
** ~~~ ** ..Time Zone difference=[1.0] hour(s), Elevation difference=[100.00] percent, [542.00] meters.
Usually the location should be the same as the weather station location.
** Severe ** Did not find matching material for Construction INTERIOR CEILING, missing material = M11 100MM LIGHTWEIGHT CONCRETE
** Severe ** Did not find matching material for Construction INTERIOR CEILING, missing material = F16 ACOUSTIC TILE
** Severe ** Did not find matching material for Construction EXTERIOR DOOR, missing material = F08 METAL SURFACE
** Severe ** Did not find matching material for Construction EXTERIOR DOOR, missing material = I01 25MM INSULATION BOARD
** Severe ** Did not find matching material for Construction INTERIOR DOOR, missing material = G05 25MM WOOD
** Severe ** Did not find matching material for Construction CPISO-PARQUET, missing material = MEDIA DENSIDAD
** Severe ** Nominal U is zero, for construction=EXTERIOR DOOR
** Severe ** Nominal U is zero, for construction=INTERIOR DOOR
All these errors were caused by not having the use of correct Construction names in the building surfaces objects.
Construction,
CPISO-PARQUET, !- Name
CPISO-Parquet, !- Outside Layer
CPISO-Lana Mineral, !- Layer 2
CPISO-Mortero de Aridos ligeros (vermiculita, !- Layer 3
CPISO-Concreto, !- Layer 4
media densidad, !- Layer 5 (Not listed in Material section.)
CPISO-Grava; !- Layer 6
Construction name is the same as the material name.
** Warning ** World Coordinate System selected. Any non-zero Building/Zone North Axes or non-zero Zone Origins are ignored.
** ~~~ ** These may be used in daylighting reference point coordinate calculations but not in normal geometry inputs.
** Warning ** Shading:Building:Detailed="C22066", Transmittance Schedule Name="ALWAYS ON", is always transparent.
** Warning ** GetSurfaces: Surfaces with interface to Ground found but no "Ground Temperatures" were input.
This is a missing object. The default temperature range is from 18 to 25°C.
** ~~~ ** Found first in surface=CONTRAPISO
** ~~~ ** Defaults, constant throughout the year of (18.0) will be used.
** Severe ** BuildingSurface:Detailed="4CB521", invalid Construction Name="EXTERIOR ROOF".
** Severe ** BuildingSurface:Detailed="5F5A4B", invalid Construction Name="EXTERIOR ROOF".
** Severe ** BuildingSurface:Detailed="9F916A", invalid Construction Name="EXTERIOR WALL". These constructions were not declared.
** Warning ** BuildingSurface:Detailed="9F916A", underground Wall Height = 0.64
** ~~~ ** ..which deos not match its construction height.
** Fatal ** Fatal error discovered in GetSurfaceData, see previous messages
...Summary of Errors that led to program termination:
..... Reference severe error count=11
..... Last severe error=BuildingSurface:Detailed="9F916A", invalid Construction Name="EXTERIOR WALL".
************* Fatal error -- final processing. More error messages may appear.
************* Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* Testing Individual Supply Air Path Integrity
************* All Supply Air Paths passed integrity testing
************* Testing Individual Return Air Path Integrity
************* All Return Air Paths passed integrity testing
************* No node connection errors were found.
************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
************* EnergyPlus Terminated--Fatal Error Detected. 7 Warning; 11 Severe Errors; Elapsed Time=00hr 00min 5.95sec
========================
There may be other errors, when these are corrected.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: julianflorentinos@xxxxxxxxx
Date: Thu, 19 Aug 2010 17:25:39 -0700
Subject: [EnergyPlus_Support] Help me!
| Hello, I'm new at this and am doing a research work. Someone could help me understand because I get these errors? and I have to change to solve them. Deputy IDF file Greetings and thanks. |
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___