Although the I/O reference doesn't state it, it seems that the Coil:Heating:DX:SingleSpeed can not be implemented in an AirLoop outside of the AirLoopHVAC:UnigtaryHeatPump:AirToAir object (error: Invalid Air Loop Component Type = "COIL:HEATING:DX:SINGLESPEED"). Is it right that the Coil:Heating:DX:SingleSpeed can only be used within the AirLoopHVAC:UnigtaryHeatPump:AirToAir? If so, is there a fundamental reason for this restriction?
I was trying to combine the Coil:Heating:DX:SingleSpeed with a AirLoopHVAC:UnitaryCoolOnly in order to be able to have the Coil:Heating:DX:SingleSpeed downstream of a Coil:Heating:Desuperheater to recover waste heat from a compressor rack (the Coil:Heating:Desuperheater can not be implemented into a AirLoopHVAC:UnigtaryHeatPump:AirToAir). Is there a way to combine the Coil:Heating:Desuperheater and Coil:Heating:DX:SingleSpeed in the same AirLoop?
Thanks,
--
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___