Brian,
Exactly! Thank you.
BRYAN BENNO BRAUER
CONSULTING ENGINEER
From:
EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Brian Mcdevitt
Sent: Monday, August 30, 2010
10:11 AM
To:
EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support]
open studio
Hi Bryan,
I think the problem is that you are not "activating" the zones before
you draw your objects. If the zone is not activated your drawn objects
will not be Energy Plus objects.
The way to activate a zone is by double clicking on its origin... It will
then be displayed with dotted lines. Once the zone is activated the
objects you draw will be energy plus objects.
--Brian McDevitt
On Mon, Aug 30, 2010 at 9:34 AM, annie marston <anniemarston@xxxxxxxxxxx> wrote:
Hi,
I am not sure if this will help but with Open Studio you have to save your file
in a special way otherwise it won't work. Go to Plugins - open studio - Save As
- then save your file including .idf. This will save it as an EnergyPlus file.
If you have forgotten to put the .idf just go into the folder where you saved
the file and add .idf extension to your file name and it should then open up in
open studio. Also when opening your file make sure you open it in the plugin.
Go to Plugins - open studio - open
Hope this helps
Annie
From: bryan@xxxxxxxxxxxx
Date: Mon, 30 Aug 2010 09:16:49 -0700
Subject: RE: [EnergyPlus_Support] open studio
Thank you. I have.
The tutorial advises that: If you draw something and it is
not the color you expected, that is a sign that something is wrong. But I have not found guidance about how to correct the problem.
BRYAN BENNO BRAUER
CONSULTING ENGINEER
From: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx]
On Behalf Of Eddie Corwin
Sent: Monday, August 30, 2010 8:41
AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support]
open studio
Have you looked at the tutorials that are posted on
YouTube? Check them out. there are very helpful for getting started
using OpenStudio
__________________________________________________________
Eddie Corwin, Energy & Sustainability Engineer
ALTANOVA - www.altanova-energy.com
T: (347) 410-9049
E: ecorwin@xxxxxxxxxxxxxxxxxxx
From: BryanB
<bryan@xxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Mon, August 30, 2010
12:42:32 AM
Subject: [EnergyPlus_Support] open
studio
I am new to open studio.
I have installed EnergyPlus and the SketchUp open studio plug in on my Windows
Vista machine. When I start SketchUp the Open Studio menu is present, and I am
able to create new EnergyPlus zones, but none of the objects that I create are
EnergyPLus objects, but simple Sketchup only. However, when I exit Sketchup, I
am prompted with "Save changes to the EnergyPlus input file Untitled.idf?
Open Studio must be running, why can I not create EnergyPlus objects?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___