Re: [EnergyPlus_Support] Simple model but no results

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Did you add output variables?

Tabular Reports?

Without any HVAC system, you will get zone temperatures and indications
for internal gains but not much else.

Are there any warnings in the .err file?


At 08:39 AM 9/9/2010, Joel Reyes wrote:


> I am a first time user of this
> program EnergyPlus using Open Studio on Windows.  My intention on
> this initial pass was to make a simple model to estimate the heat load
> entering the skin of our building on very hot
> days.      
>
> Built model (only a structure with appropriate materials and not
> including any loads or cooling)
> Oriented it (long,lat,elev,rotation)
> Input weather file
> Ran simulation
>
> I thought this would present the data I was looking for but it did
> not.  The simulation runs and presents me a report that is zero for
> any calculated value.
>
>
> Other than inputting the weather file and orienting the building I don't
> recall any parameters I set dealing with environmental conditions. 
> Anyone know what I am missing?  Hoping to be pointed in right
> direction.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___