[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] PTHP dehumidification



  Which version of EnergyPlus are you using?

Figure 130 in the Input-Output Reference for version 5.0 (latest) is 
"Schematic of the Balanced Flow Desiccant Heat Exchanger"... not 
Packaged Terminal Heat Pump.



On 9/17/2010 12:29 AM, mark.carey@xxxxxxxxxxxxx wrote:
> Apologies if this arrives twice - posting from the web interface and original post isnt shwing up.
>
> Simulating a building to get comparitive energy consumptions for with and without humidity control.
>
> Humidification using a Humidifier:Steam:electric appears straightforward.
>
> Have a model working with PHTPs giving results for temperature.  IO ref Figure 130 implies that a PTHP will do dehum (cooling coil before heating coil) however it only takes a Thermostat input.  IO ref page 1198 suggests that if a ZoneControl:Humidistat is added and if my equipiment is capable of dehumidifying it will (however ESO output shows uncontrolled RH within the zone).  Has anyone had any sucess getting a PTHP to dehumidify?
>
> It doesnt appear to be possible to take the expanded idf from the PTHP and change the controller as there does not appear to be a suitable controller that will operate with RH priority driving the cooling coil and then use the reheat coil to maintain space temperture (as would be the case practically with a water based air handler with cooling and heating coils).  What controller type have people had sucess using with water based air handlers doing dehum?
>
> Any suggestions greatly appreciated.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/