[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Airloop Error Message


I received the following error:

* Warning ** In AirLoopHVAC AHU-B-5 there is unbalanced exhaust air flow.
   **   ~~~   **  During Warmup, Environment=SUMMERSIZINGDAY, at Simulation time=07/20 19:40 - 19:50
   **   ~~~   **   Unless there is balancing infiltration / ventilation air flow, this will result in
   **   ~~~   **   load due to induced outdoor air being neglected in the simulation.

I do have infiltration air going into the zone so is this warning okay to ignore?  I specified the flow rate in my system and I do not have any return fans.  I am also getting a maximum iterations error for my Airloop.  I think these are connected.  Has anyone run across this problem?  Thank you.


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: