[EnergyPlus_Support] Re: Airloop Error

[Mário <mneves32@xxxxxxxxx>]

Yes, 

But how mutch air are you recirculating or rmoving from your zone?


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "grandocu" <jgrando@...> wrote:
>
> I have the outdoor air rate specified for the system and i'm assuming it is autosizing to that. I can run a simulation to check but it is taking a much longer time to do it due to the fact that it is getting these maximum iteration loop errors.
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Mário <mneves32@> wrote:
> >
> > 
> > I am not seing the entire problem, but...
> > 
> > How mutch air are you removing by the exust nodes of yours zones?
> > 
> > 
> > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "grandocu" <jgrando@> wrote:
> > >
> > > Hello,
> > > 
> > > I'm getting the following error:
> > > 
> > > ** Warning ** In AirLoopHVAC AHU-B-5 there is unbalanced exhaust air flow.
> > >    **   ~~~   **  During Warmup, Environment=SUMMERSIZINGDAY, at Simulation time=07/20 19:40 - 19:50
> > >    **   ~~~   **   Unless there is balancing infiltration / ventilation air flow, this will result in
> > >    **   ~~~   **   load due to induced outdoor air being neglected in the simulation.
> > > 
> > > I don't see a problem with my connections but I did supply airflow rate myself.  I am also getting a "maximum iterations" error for this airloop.  Has anyone ever had this problem before?  Thank you.
> > >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/