[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Airloop maximum iterations.
It happens pretty much every day on the warmup hour if that helps.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "grandocu" <jgrando@...> wrote:
>
> Hello everyone,
>
> I have a warning that keeps popping up saying "Maximum iterations (20) exceeded" and the message below says the airloop failed, but all tolerance values below are 0. Does anyone know why this message is showing up if all the tolerance values are 0?
>
> ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at ANNSIM, 01/02 05:10 - 05:11
> ** ~~~ ** SimFlags=[TFFFFFFF] AirLoops[T],ZoneEq[F],NonZoneEq[F],PlantLoops[F],CondLoops[F],ElecCircuits[F],PlantDemandLoops[F],CondDemandLoops[F]..F=ok,T=fail
> ** ~~~ ** HVAC Tolerance Flags=[0000000] Enthalpy[0],MassFlow[0],HumRat[0],Pressure[0],FlowQual[0],Energy[0],Temp[0]..0=ok,1=fail
> ** ~~~ ** HVAC Tolerance Values, Most Recent listed first
> ** ~~~ ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** HVAC side outlet node=[724 - AHU-B-6 RETURN AIR OUTLET]
> ** ~~~ ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** HVAC side outlet node=[723 - AHU-B-3 RETURN AIR OUTLET]
> ** ~~~ ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** HVAC side outlet node=[720 - AHU-B-5 RETURN AIR OUTLET]
> ** ~~~ ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** HVAC side outlet node=[719 - AHU-B-4 RETURN AIR OUTLET]
> ** ~~~ ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** HVAC side outlet node=[722 - CB AHU-B-2 RETURN AIR OUTLET]
> ** ~~~ ** Plant Tolerance Flags=[00000000] Enthalpy[0],MassFlow[0],HumRat[0],Pressure[0],FlowQual[0],Energy[0],Temp[0],PlantFlowMassFlow[0]..0=ok,1=fail
> ** ~~~ ** Plant Tolerance Values, Most Recent listed first
> ** ~~~ ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** Plant side outlet node=[390 - CB CONDENSER DEMAND OUTLET NODE]
> ** ~~~ ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** Plant side outlet node=[347 - CHW_LOOP CNDW DEMAND OUTLET]
> ** ~~~ ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** Plant side outlet node=[383 - CB CONDENSER DEMAND INLET NODE]
> ** ~~~ ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** Plant side outlet node=[342 - CHW_LOOP CNDW DEMAND INLET]
> ** ~~~ ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
> ** ~~~ ** FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
> ** ~~~ ** Plant side outlet node=[314 - HW_LOOP HW DEMAND OUTLET]
> ** ~~~ ** Plant Flow Tolerance Values, Most Recent listed first
> ** ~~~ ** PlantFlowFlowTol=0.000
> ** ~~~ ** PlantFlowFlowTol=0.000
> ** ~~~ ** PlantFlowFlowTol=0.000
> ** ~~~ ** PlantFlowFlowTol=0.000
> ** ~~~ ** PlantFlowFlowTol=0.000
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/