| Hello, I am running multiple simulations using various building configurations and I have run into the problem in my results which I can't determine the cause for. I get low natural gas consumption in the winter months and high consumption during the summer due to the reheat system. I am using an old version of EnergyPlus which I hope is not a problem. I do get a Severe error in my simulations which occurs multiple times: Severe ** Controller error for controller = AHU HEATING COIL CONTROLLER ** ~~~ ** Occurrence info=EDMONTON STONY PLAIN AB CAN WYEC2-B-25145 WMO#=711230, 08/06 04:02 - 04:03 ** ~~~ ** Controller function is inconsistent with user specified controller action = "" action ** ~~~ ** Actuator will be set to minimum action ** ~~~ ** Note: Chilled water coils should be reverse action and the entering chilled ** ~~~ ** water temperature should be below the setpoint ** ~~~ ** Note: Hot water coils should be normal action and the entering hot ** ~~~ ** water temperature should be above the setpoint I have attached the simulation file I am working with and the weather file. Thank you for your help. |
Attachment not found: d:\eudora\attach\11.epw
Attachment not found: d:\eudora\attach\File_11.idf