In the IDF Editor?
I'm trying to figure out how you made it.
At 12:50 PM 11/24/2010, reza m wrote:
the file was ParametricInsulation-5ZoneAirCooled.idf in example folder my energy plus is 6
I did not do any thing more only I made new object in parametric runcontrol and it made 100 runs
!- =========== ALL OBJECTS IN CLASS: PARAMETRIC:SETVALUEFORRUN ===========
Parametric:SetValueForRun,
$insDepth, !- Parameter Name
0.0508, !- Value for run 1
0.0762, !- Value for run 2
0.1016, !- Value for run 3
0.1270; !- Value for run 4
!- =========== ALL OBJECTS IN CLASS: PARAMETRIC:RUNCONTROL ===========
Parametric:RunControl,
reza, !- Name
Yes, !- Perform run 1
Yes, !- Perform run 2
Yes, !- Perform run 3
Yes, !- Perform run 4
Yes, !- Perform run 5
Yes, !- Perform run 6
Yes, !- Perform run 7
Yes, !- Perform run 8
Yes, !- Perform run 9
Yes, !- Perform run 10
Yes, !- Perform run 11
Yes, !- Perform run 12
Yes, !- Perform run 13
Yes, !- Perform run 14
Yes, !- Perform run 15
Yes, !- Perform run 16
Yes, !- Perform run 17
Yes, !- Perform run 18
Yes, !- Perform run 19
Yes, !- Perform run 20
Yes, !- Perform run 21
Yes, !- Perform run 22
Yes, !- Perform run 23
Yes, !- Perform run 24
Yes, !- Perform run 25
Yes, !- Perform run 26
Yes, !- Perform run 27
Yes, !- Perform run 28
Yes, !- Perform run 29
Yes, !- Perform run 30
Yes, !- Perform run 31
Yes, !- Perform run 32
Yes, !- Perform run 33
Yes, !- Perform run 34
Yes, !- Perform run 35
Yes, !- Perform run 36
Yes, !- Perform run 37
, !- Perform run 38
Yes, !- Perform run 39
Yes, !- Perform run 40
Yes, !- Perform run 41
Yes, !- Perform run 42
Yes, !- Perform run 43
Yes, !- Perform run 44
Yes, !- Perform run 45
Yes, !- Perform run 46
Yes, !- Perform run 47
Yes, !- Perform run 48
Yes, !- Perform run 49
Yes, !- Perform run 50
Yes, !- Perform run 51
Yes, !- Perform run 52
Yes, !- Perform run 53
Yes, !- Perform run 54
Yes, !- Perform run 55
Yes, !- Perform run 56
Yes, !- Perform run 57
Yes, !- Perform run 58
Yes, !- Perform run 59
Yes, !- Perform run 60
Yes, !- Perform run 61
Yes, !- Perform run 62
Yes, !- Perform run 63
Yes, !- Perform run 64
Yes, !- Perform run 65
Yes, !- Perform run 66
Yes, !- Perform run 67
Yes, !- Perform run 68
Yes, !- Perform run 69
Yes, !- Perform run 70
Yes, !- Perform run 71
Yes, !- Perform run 72
Yes, !- Perform run 73
Yes, !- Perform run 74
Yes, !- Perform run 75
Yes, !- Perform run 76
Yes, !- Perform run 77
Yes, !- Perform run 78
Yes, !- Perform run 79
Yes, !- Perform run 80
Yes, !- Perform run 81
Yes, !- Perform run 82
Yes, !- Perform run 83
Yes, !- Perform run 84
Yes, !- Perform run 85
Yes, !- Perform run 86
Yes, !- Perform run 87
Yes, !- Perform run 88
Yes, !- Perform run 89
Yes, !- Perform run 90
Yes, !- Perform run 91
Yes, !- Perform run 92
Yes, !- Perform run 93
Yes, !- Perform run 94
Yes, !- Perform run 95
Yes, !- Perform run 96
Yes, !- Perform run 97
Yes, !- Perform run 98
Yes, !- Perform run 99
Yes; !- Perform run 100
On Wed, Nov 24, 2010 at 8:42 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
- You will need to submit your input file to the helpdesk.
- For example, we have this in example file 1ZoneParameterAspect:
- Parametric:RunControl,
- AllRuns, !- Name
- Yes, !- Perform run 1
- Yes, !- Perform run 2
- Yes, !- Perform run 3
- Yes, !- Perform run 4
- Yes; !- Perform run 5
- Parametric:SetValueForRun,
- $aspectRatio, !- Parameter Name
- 0.2, !- Value for run 1
- 0.5, !- Value for run 2
- 1, !- Value for run 3
- 2, !- Value for run 4
- 5; !- Value for run 5
- Parametric:Logic,
- Main, !- name
- PARAMETER $bldgArea, !- parametric logic line 1
- PARAMETER $depth, !- parametric logic line 2
- PARAMETER $width, !- parametric logic line 3
- PARAMETER $height, !- parametric logic line 4
- $bldgArea = 300.0, !- parametric logic line 5
- $depth = SQRT($bldgArea / $aspectRatio), !- parametric logic line 6
- $width = $depth * $aspectRatio, !- parametric logic line 7
- $height = 4.0; !- parametric logic line 8
- only 5 runs are done.
- At 12:36 PM 11/24/2010, reza m wrote:
- HI,
- I mean to have for example 5 runs we must to Set " No" for 95 runs ! please check the parametric example and add one object in "parametric run control" . you see it make an object that 100 runs are yes!
- REZA
- On Wed, Nov 24, 2010 at 8:29 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
- it should only run as many as you have
- Parametric Set Value for Run
- entered.
- At 12:25 PM 11/24/2010, reza m wrote:
- Hi Linda,
- I added an object in parametric run control but all of 100 controls by default are set " yes" so if i run the program it simulate 100 times.
- is it possible to set all of them "No".
- with regards
- REZA
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___