[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Warning: Azimuths do not match as expected?



Hi,

i received the following warning after i turned the building 180° to 9°, the surfaces remained on the origional azimuth.

** Warning ** GetSurfaceData: InterZone Surface Azimuths do not match as expected.
   **   ~~~   **   Azimuth=189.0, Tilt=90.0, in Surface=OBJ:0903, Zone=5__WHG_1_FLUR_00
   **   ~~~   **   Azimuth=189.0, Tilt=90.0, in Surface=OBJ:0889, Zone=6_WHG_1_BAD_00
   **   ~~~   ** ..surface class of base surface=Wall

It is probably caused, because the building had an origional azimuth of 189 ° from the Ecotect imoport, after the import in E+, I entered an new azimuth of 9 °: It`s only occours for four surfaces: the other 1000 are ok! Could i ignore the warning?

Would be glad, if anyone would have a hint,

thanks Marie 




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/