[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: A possible bug or I am doing somethinh wrong

Dear Linda,

I am not too sure what do you mean, with your post.

Kind regards

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
> Note that it is using your calculated volumes, not the ones it calculates.
> The volume calculation is quite robust but may not be accurate for 
> non-enclosed zones.
> If you enter:
> into your idf it also should show some debug outputs on the .dbg file
> At 07:01 AM 12/11/2010, motabmx1 wrote:
> >Hi all, I found that my eio file is providing me wrong room volumes. 
> >I created the iDF file in energy plus with relative coordenates. I 
> >put the name to the IDF and then I did the geometric in open studio. 
> >I checked all zone coordenates and they are all the same in both 
> >programs (energy plus and open studio). I run the simulation in 
> >energy plus,0 warnings, 0 severe erros, 0 fatal erros. Them I 
> >checked my eio file and I found that energy plus is calculating 
> >volumes much higher that the ones I obtain by doing it by hand. 
> >Anyone there has come across anything similar?


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: