[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Openstudio automatic detection of interior walls/floors





Hello,
 
I made a model and saved it in Openstudio/Sketchup. Once I open that file again, it gives me a lot of triangulated faces and a lot of error and some faces missing etc..Does this happen always or is it just me? how do I get to reopen a file clean?


On Fri, Dec 10, 2010 at 8:39 PM, Vinay Devanathan <vinay.devanathan@xxxxxxxxx> wrote:
Reza,

That's really helpful. I will try doing it this way. 

Thank you!


On Dec 10, 2010, at 8:35 PM, reza m <reza.energy@xxxxxxxxx> wrote:

 

Hi,
It is not correct. You had faulted in modeling. Fallow these steps:
  1- define a zone for each floor.
2- double-click on zone also on object \right click\intersect face \ with model ( do this for all of your zones)
3-run surface matching tool\ match in the entire model
4- save IDF
after this process you will have interior and exterior surfaces
also maybe you have defined materials or contractions, and you want to assign them to exterior, interior surfaces
use Default Construction tool
or watch this tutorial
http://www.youtube.com/watch?v=qfqEXN-icQA
REZA

On Sat, Dec 11, 2010 at 2:13 AM, Vinay Devanathan <vinay.devanathan@xxxxxxxxx> wrote:
 

Hello,
 
I am modeling a multi-story building using OpenStudio and when I built zones (second story) on top of the already built ground floor zones, OpenStudio carries the external floor construction definition for internal floors and external wal defn for internal walls. Doesn't OpenStudio automatically detect the surface characteristics once it is built? Or am I missing something here?
 
Hope to hear from someone.
 
Thanks!
 
Regards,
Vinay
 
 





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___