DesignBuilder calculates the average building air temperature using a volume-weighted average of the temperatures in all the zones in the simulation.
Andy Tindale
DesignBuilder
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Nick Long
Sent: 05 January 2011 14:19
To: energyplus support
Subject: [EnergyPlus_Support] Zone Mean Air Temperature
Dear All,
I am trying to find out the air temperature inside a zone of the building, but when i am using the output variable "Zone Mean Air Temperature", it is not working and i am not getting any results in the spreadsheets. Is there any other way to find this.
Also secondly how i can find the building air temperature in E+ as we get in DesignBuilder (irrespective of any zone temperature).
Thanks.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___