[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] DesignBuilder CFD Introductory Training - Webinar (January 28, 2011 )

  Announcing a  great opportunity to get trained without leaving your seat by attending 1-day DesignBuilder Software CFD Training Webinar on January 28, 2011 (10 am – 3pm EST).

DesignBuilder CFD has been especially designed to provide data on airflow and temperature distribution in and around buildings using the same methods as the general purpose pure CFD packages, but at a fraction of the cost and without the need for specialist knowledge.

Using conventional CFD packages for building airflow analysis can be a time consuming task requiring very careful attention to setting up the correct geometry and boundary conditions. Using CFD in DesignBuilder simplifies this process hugely by automatically providing the geometry and boundary conditions. Temperatures, heat flows and flow rates previously calculated by EnergyPlus can be seamlessly used to provide boundary conditions simply by specifying the time/date of the CFD analysis.

For more details about DesignBuilder CFD:


The objective of this workshop is to  provide a general overview and introduction to DesignBuilder CFD software for both internal and external analysis. The trainees will learn to quickly setup a building model, create assemblies, change the grid settings, import E+ calculated temperatures, air velocities etc and assign boundary conditions, run CFD simulation and analyze the results.

 For more information and registration:






Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe