Re: [EnergyPlus_Support] Question about output variable

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

The easy thing to do would be:

Output:Variable,*,Packaged Terminal Air Conditioner Total Zone Cooling
Rate, Hourly,On;

This will output all the applicable versions for the PTAC Zone Cooling
Rate and then you will be able to see what the "keys" should
be.  (They will show in the .eso file and/or the .csv file)


At 03:19 PM 1/19/2011, Jose Torre-Bueno wrote:


> I am trying to use the
> output:variable class and cannot get a variable in the rdd to appear in
> the csv.  The variable "Packaged Terminal Air Conditioner Total
> Zone Cooling Rate" appears in the rdd with the entry:
>
> HVAC,Average,Packaged Terminal Air Conditioner Total Zone Cooling Rate
> [W]
>
> I assume that this means that in place of the zone name I need an HVAC
> name but I dont know where to find it.
> I know that:
> Output:Variable,269,Packaged Terminal Air Conditioner Total Zone Cooling
> Rate, Hourly,On;
> does not work
>
> Any explanation would be appreciated.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___