[EnergyPlus_Support] Solar fassade

["Hugo Leal" <hug0leal@xxxxxxxxx>]

Hi
I'm a master degree student and I'm trying to simulate a simple version of a solar fassade, which consists in a simple layer of glass covering a wall, with an air gap in between. This air gap is open, above and below, in the summer for natural ventilation.  At first I tried to simulate this with another zone (the air gap), using the exterior natural vented cavity, but then I realized that this supposed a baffle, whose characteristics are not the same as simple glass. Is it possible to simulate this situation? 
Thank you
Hugo Leal




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/