Re: [EnergyPlus_Support] Re: Help with Simulation

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Did you change the other window to use that
convention?

Send your input file to the helpdesk and we can try to help you. 

energyplus-support@xxxxxxxx

At 12:23 PM 1/26/2011, Jaime Zuluaga Machado wrote:


> HI!
>  
>  
> Those coordinates work in the same way, is still having troubles, do you
> have any other idea about this problem
>  
> Thanks
>  
>  
>  
>  
> Jaime Zuluaga M 
>
>
>
> From: Linda Lawrie
> <linda@xxxxxxxxxxxxxx>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent: Wed, 26 January, 2011 14:06:25
> Subject: Re: [EnergyPlus_Support] Re: Help with Simulation
>
>   
>
> But the convention is upper left corner as the starting coordinate. 
> Doesn't the tutorial say that?
>
>     0,4.5,2.35,  !- X,Y,Z ==> Vertex 1 {m}
>     0,4.5,0.35,  !- X,Y,Z ==> Vertex 2 {m}
>     0,1.5,0.35,  !- X,Y,Z ==> Vertex 3 {m}
>     0,1.5,2.35;  !- X,Y,Z ==> Vertex 4
> {m}
>
> would be correct.
>
> At 11:58 AM 1/26/2011, Jaime Zuluaga Machado wrote:
>
>
> > Yes i put the follow
> > coordinates
> >  
> > (0,1.5,0.35)
> > (0,1.5,2.35)
> > (0,4.5,2.35)
> > (0,4.5,0.35)
> >  
> > Even i saw the DXF file and the windows ubication is correct.
> >  
> > Did you run the same simulation, and did it works succesfull?
> >  
> >  
> > Thankas a lot
> >  
> >
> >  
> > Jaime Zuluaga M 
> From: Niraj Poudel
> <nirajpdl@xxxxxxxxx>
> To: jaimezuluagam@xxxxxxxxx
> Sent: Wed, 26 January, 2011 13:43:08
> Subject: Re: Help with Simulation
>
> Did you add in the coordinates of the window? Because I am also learning
> and had the same problem..you need to scroll down the "Getting
> Started with Eplus" document where you can find the co-ordinates of
> the windows for exercise 1 and then add those co-ordinates in the IDF
> editor. Once you do that, run the simulation and it should work. Please
> let me know what happens after that, since I am also learning EnergyPlus
> and would like to hear your comments on it.
>  
> Sincerely yours'
> Niraj

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___