Re: [EnergyPlus_Support] Re: Help with Simulation

Yes i did

I attached the input file, if you would have a look and see some trouble let me know, i have tried changing everything but is still going wrong.

Thanks a lot

Jaime Zuluaga M

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wed, 26 January, 2011 14:31:18
Subject: Re: [EnergyPlus_Support] Re: Help with Simulation

Did you change the other window to use that convention?

Send your input file to the helpdesk and we can try to help you.

energyplus-support@xxxxxxxx

At 12:23 PM 1/26/2011, Jaime Zuluaga Machado wrote:

HI!

Those coordinates work in the same way, is still having troubles, do you have any other idea about this problem

Thanks

Jaime Zuluaga M

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wed, 26 January, 2011 14:06:25
Subject: Re: [EnergyPlus_Support] Re: Help with Simulation

But the convention is upper left corner as the starting coordinate. Doesn't the tutorial say that?

    0,4.5,2.35, !- X,Y,Z ==> Vertex 1 {m}
    0,4.5,0.35, !- X,Y,Z ==> Vertex 2 {m}
    0,1.5,0.35, !- X,Y,Z ==> Vertex 3 {m}
    0,1.5,2.35; !- X,Y,Z ==> Vertex 4 {m}

would be correct.

At 11:58 AM 1/26/2011, Jaime Zuluaga Machado wrote:

Yes i put the follow coordinates

(0,1.5,0.35)
(0,1.5,2.35)
(0,4.5,2.35)
(0,4.5,0.35)

Even i saw the DXF file and the windows ubication is correct.

Did you run the same simulation, and did it works succesfull?

Thankas a lot

Jaime Zuluaga M

From: Niraj Poudel <nirajpdl@xxxxxxxxx>
To: jaimezuluagam@xxxxxxxxx
Sent: Wed, 26 January, 2011 13:43:08
Subject: Re: Help with Simulation

Did you add in the coordinates of the window? Because I am also learning and had the same problem..you need to scroll down the "Getting Started with Eplus" document where you can find the co-ordinates of the windows for exercise 1 and then add those co-ordinates in the IDF editor. Once you do that, run the simulation and it should work. Please let me know what happens after that, since I am also learning EnergyPlus and would like to hear your comments on it.

Sincerely yours'
Niraj

__._,_.___

Reply to sender | Reply to group | Reply via web post | Start a New Topic

Messages in this topic (6)

Recent Activity:

New Members 22
New Files 7

Visit Your Group

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.

EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

MARKETPLACE

Get great advice about dogs and cats. Visit the Dog & Cat Answers Center.

Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.

Switch to: Text-Only, Daily Digest ? Unsubscribe ? Terms of Use

__,_._,___