Linda:
I followed your advice and tried to run DOE2.1 files from the Standard 140-2007 as:
1. Converted them with DOE2Translator
2. Run them using EnergyPlus 6 version.
It creates about more than 10 severe errors and finally failure of the program
Any other suggestions?
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Linda Lawrie
Sent: Wednesday, February 02, 2011 5:16 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Standard 140-2007 testing files
If you are using the version currently downloadable (DOE2Translator), you will need to run them on Version 6 of the EnergyPlus software, not V3.0
At 03:13 PM 2/2/2011, Victor Gorokhov wrote:
Several problems are encountered when we try to run DOE input files taken from Standard 140-2007.
__._,_.___
1. Files converted from INP format with the DOE2Translator create a lot of severe errors and finally failure of the Energy
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___