Like Liam said. Sorry for the duplicated answer, didnt notice someone already responded to the question.
Pedro
On 07-02-2011 8:50, Pedro Peixeiro wrote:
Hi Omar.
Is your temperature setpoint variation very complex? you can use a schedule to control the setpoint temperatures of the thermostats for whatever times of the day you want.
Pedro
On 06-02-2011 16:24, omarvelling wrote:Dear All,
Is there any way in E+ that allows the user to change the heating/cooling set point of a certain zone at each simulation time-step by using a boundary file?
The boundary file will contain time and dry bulb temperature to be used as the zone set temperature. If an ideal control is applied to that zone, providing the cooling or heating needed, the set temperature will be the zone temperature. Provided that there is an "unlimited" cooling device, the temperature in the zone will be maintained at the set point temperature.
Regards,
Omar Ibraheem
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___