[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Modelling VRV system

I'm attempting the approximate-VRF method mentioned below. 
1. Should the rated conditions be the same for all speeds?
2. Curves: are they defined by E+ or user-defined?

InputOutput p.1477
"rating point (the air entering the cooling coil at 26.7°C drybulb/19.4°C wetbulb and air entering the outdoor condenser coil at 35°C drybulb/23.9°C wetbulb)"
InputOutput p.1514
"the multispeed coil object is described by specifying the performance at different operating speeds at rated conditions"



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "alberto" <ahneto@...> wrote:
> Dear Mark,
> The four step variation I mentioned is related to the menu COIL:COOLING:DX:MULTISPEED where we can set 04 different speeds where the model of such coil can be simulated. For each speed, you can provide all the parameters that can represent the coil but it is different from a VRF because the system works in a continuous variation of these parameters but I think it is the closest model EnergyPlus have at the moment.
> Alberto
> ----- Original Message ----- 
>   From: Zoeteman, Mark R. 
>   To: ahneto@... 
>   Cc: EnergyPlus_Support@xxxxxxxxxxxxxxx 
>   Sent: Monday, May 24, 2010 11:40 AM
>   Subject: [EnergyPlus_Support] Modelling VRV system
>   Alberto,
>   Is following page 14 from "Tips and Tricks for Using EnergyPlus" what you are referring to model VRV system? I don't see reference to a four stepped variation you referred to in your response to Felipe Agustin.
>   Mark Zoeteman, FTC&H


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: