May I have another hint, please?
Searches in the Help files for “Space multiplier”, “Spacemultiplier”, and “multiplier” don’t bring up anything useful….
Thanks!
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Karen Walkerman
Sent: Thursday, February 24, 2011 2:25 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Internal Mass approximations
In this case you use a "space multiplier"
On Thu, Feb 24, 2011 at 2:23 PM, jvd2pe <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Dear E+ forum, To date, I have not tried to combine zones on different
floors. Instead, I model separate zones for each floor. As I begin a 12
story structure model, I realize that the energy model will produce
essentially the same results if I
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___