[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] stop
At 2011-03-25 17:35:32ï¼?energyplus_problem <energyplus_problem@xxxxxxxxx> wrote:
>Hi everyone,
>
>I'm modelling a two-storey house with an underfloor heating system using the LowTemperatureRadiant:VariableFlow function. This unit should run with water provided by a Boiler:HotWater. However, the output shows that there is no water flow present in the plant and I cann't figure out why. I tried to change the design temperatures as well as entering a specific value instead of autosize the rated flow rates, but the result stays the same.
>Does anyone know what is wrong?
>
>Yours sincerely, Jan
>
>PS: I don't know how to attach files, so I've just inserted the txt here
>
>----------------------------------------------------------------------
>
>
>!-Generator IDFEditor 1.38a
>!-Option SortedOrder
>
>!-NOTE: All comments with '!-' are ignored by the IDFEditor and are generated automatically.
>!- Use '!' comments if they need to be retained when using the IDFEditor.
>
>
>!- =========== ALL OBJECTS IN CLASS: VERSION ===========
>
>Version,
> 6.0; !- Version Identifier
>
>
>!- =========== ALL OBJECTS IN CLASS: SIMULATIONCONTROL ===========
>
>SimulationControl,
> No, !- Do Zone Sizing Calculation
> No, !- Do System Sizing Calculation
> Yes, !- Do Plant Sizing Calculation
> No, !- Run Simulation for Sizing Periods
> Yes; !- Run Simulation for Weather File Run Periods
>
>
>!- =========== ALL OBJECTS IN CLASS: BUILDING ===========
>
>Building,
> NormalScale, !- Name
> 315, !- North Axis {deg}
> Suburbs, !- Terrain
> 0.04, !- Loads Convergence Tolerance Value
> 0.4, !- Temperature Convergence Tolerance Value {deltaC}
> FullExterior, !- Solar Distribution
> 25; !- Maximum Number of Warmup Days
>
>
>!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:INSIDE ===========
>
>SurfaceConvectionAlgorithm:Inside,
> TARP; !- Algorithm
>
>
>!- =========== ALL OBJECTS IN CLASS: SURFACECONVECTIONALGORITHM:OUTSIDE ===========
>
>SurfaceConvectionAlgorithm:Outside,
> DOE-2; !- Algorithm
>
>
>!- =========== ALL OBJECTS IN CLASS: HEATBALANCEALGORITHM ===========
>
>HeatBalanceAlgorithm,
> ConductionFiniteDifference, !- Algorithm
> 200; !- Surface Temperature Upper Limit
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONEAIRHEATBALANCEALGORITHM ===========
>
>ZoneAirHeatBalanceAlgorithm,
> ThirdOrderBackwardDifference; !- Algorithm
>
>
>!- =========== ALL OBJECTS IN CLASS: TIMESTEP ===========
>
>Timestep,
> 6; !- Number of Timesteps per Hour
>
>
>!- =========== ALL OBJECTS IN CLASS: SITE:LOCATION ===========
>
>Site:Location,
> Susten, !- Name
> 7.8, !- Latitude {deg}
> 46.3, !- Longitude {deg}
> 1, !- Time Zone {hr}
> 639; !- Elevation {m}
>
>
>!- =========== ALL OBJECTS IN CLASS: SIZINGPERIOD:WEATHERFILEDAYS ===========
>
>SizingPeriod:WeatherFileDays,
> SizingWeatherFileDays, !- Name
> 1, !- Begin Month
> 1, !- Begin Day of Month
> 3, !- End Month
> 31, !- End Day of Month
> Monday, !- Day of Week for Start Day
> Yes, !- Use Weather File Daylight Saving Period
> Yes; !- Use Weather File Rain and Snow Indicators
>
>
>!- =========== ALL OBJECTS IN CLASS: RUNPERIOD ===========
>
>RunPeriod,
> , !- Name
> 1, !- Begin Month
> 1, !- Begin Day of Month
> 3, !- End Month
> 31, !- End Day of Month
> UseWeatherFile, !- Day of Week for Start Day
> Yes, !- Use Weather File Holidays and Special Days
> Yes, !- Use Weather File Daylight Saving Period
> No, !- Apply Weekend Holiday Rule
> Yes, !- Use Weather File Rain Indicators
> Yes, !- Use Weather File Snow Indicators
> 1; !- Number of Times Runperiod to be Repeated
>
>
>!- =========== ALL OBJECTS IN CLASS: SITE:GROUNDTEMPERATURE:BUILDINGSURFACE ===========
>
>Site:GroundTemperature:BuildingSurface,
> 5, !- January Ground Temperature {C}
> 5.67, !- February Ground Temperature {C}
> 7.5, !- March Ground Temperature {C}
> 10, !- April Ground Temperature {C}
> 12.5, !- May Ground Temperature {C}
> 14.33, !- June Ground Temperature {C}
> 15, !- July Ground Temperature {C}
> 14.33, !- August Ground Temperature {C}
> 12.5, !- September Ground Temperature {C}
> 10, !- October Ground Temperature {C}
> 7.5, !- November Ground Temperature {C}
> 5.67; !- December Ground Temperature {C}
>
>
>!- =========== ALL OBJECTS IN CLASS: SCHEDULETYPELIMITS ===========
>
>ScheduleTypeLimits,
> Any Number; !- Name
>
>ScheduleTypeLimits,
> Fraction, !- Name
> 0.0, !- Lower Limit Value
> 1.0, !- Upper Limit Value
> CONTINUOUS; !- Numeric Type
>
>ScheduleTypeLimits,
> Temperature, !- Name
> -60, !- Lower Limit Value
> 200, !- Upper Limit Value
> CONTINUOUS; !- Numeric Type
>
>ScheduleTypeLimits,
> On/Off, !- Name
> 0, !- Lower Limit Value
> 1, !- Upper Limit Value
> DISCRETE; !- Numeric Type
>
>ScheduleTypeLimits,
> Control Type, !- Name
> 0, !- Lower Limit Value
> 4, !- Upper Limit Value
> DISCRETE; !- Numeric Type
>
>ScheduleTypeLimits,
> Humidity, !- Name
> 10, !- Lower Limit Value
> 90, !- Upper Limit Value
> CONTINUOUS; !- Numeric Type
>
>ScheduleTypeLimits,
> Number; !- Name
>
>
>!- =========== ALL OBJECTS IN CLASS: SCHEDULE:COMPACT ===========
>
>Schedule:Compact,
> Heating Setpoint Schedule, !- Name
> Temperature, !- Schedule Type Limits Name
> Through: 12/31, !- Field 1
> For: AllDays, !- Field 2
> Until: 05:00, !- Field 3
> 21, !- Field 4
> Until: 19:00, !- Field 5
> 21.0, !- Field 6
> Until: 24:00, !- Field 7
> 21; !- Field 8
>
>Schedule:Compact,
> Baseboard Operation Schedule, !- Name
> On/Off, !- Schedule Type Limits Name
> Through: 12/31, !- Field 1
> For: AllDays, !- Field 2
> Until: 24:00, !- Field 3
> 1; !- Field 4
>
>Schedule:Compact,
> Zone One Control Type Schedule, !- Name
> Control Type, !- Schedule Type Limits Name
> Through: 12/31, !- Field 1
> For: AllDays, !- Field 2
> Until: 24:00, !- Field 3
> 1; !- Field 4
>
>
>!- =========== ALL OBJECTS IN CLASS: MATERIAL ===========
>
>Material,
> Aw innenputz, !- Name
> Smooth, !- Roughness
> 0.015, !- Thickness {m}
> 0.7, !- Conductivity {W/m-K}
> 1400, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Aw Modulbackstein, !- Name
> MediumRough, !- Roughness
> 0.18, !- Thickness {m}
> 0.44, !- Conductivity {W/m-K}
> 1100, !- Density {kg/m3}
> 940, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Aw Lamitherm , !- Name
> MediumRough, !- Roughness
> 0.14, !- Thickness {m}
> 0.038, !- Conductivity {W/m-K}
> 20, !- Density {kg/m3}
> 1450, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Aw Aussenputz, !- Name
> Rough, !- Roughness
> 0.012, !- Thickness {m}
> 0.87, !- Conductivity {W/m-K}
> 1800, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material,
> Iw Verputz innen, !- Name
> Smooth, !- Roughness
> 0.015, !- Thickness {m}
> 0.87, !- Conductivity {W/m-K}
> 1400, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Iw Modulbackstein, !- Name
> MediumRough, !- Roughness
> 0.12, !- Thickness {m}
> 0.44, !- Conductivity {W/m-K}
> 1100, !- Density {kg/m3}
> 940, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Iw Verputz aussen, !- Name
> Smooth, !- Roughness
> 0.015, !- Thickness {m}
> 0.87, !- Conductivity {W/m-K}
> 1400, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BgE Zementunterlag, !- Name
> MediumRough, !- Roughness
> 0.03, !- Thickness {m}
> 1.5, !- Conductivity {W/m-K}
> 1800, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BgE Swisspor EPS20, !- Name
> MediumSmooth, !- Roughness
> 0.022, !- Thickness {m}
> 0.037, !- Conductivity {W/m-K}
> 20, !- Density {kg/m3}
> 1450, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BgE Flumroc, !- Name
> MediumSmooth, !- Roughness
> 0.08, !- Thickness {m}
> 0.036, !- Conductivity {W/m-K}
> 32, !- Density {kg/m3}
> 1030, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BgE Betonplatten, !- Name
> MediumSmooth, !- Roughness
> 0.25, !- Thickness {m}
> 1.7, !- Conductivity {W/m-K}
> 2400, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BgE Misapor, !- Name
> MediumSmooth, !- Roughness
> 0.35, !- Thickness {m}
> 0.08, !- Conductivity {W/m-K}
> 55, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BguR Zementmörtel, !- Name
> MediumSmooth, !- Roughness
> 0.07, !- Thickness {m}
> 1.5, !- Conductivity {W/m-K}
> 2100, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BguG Trittschaldpl, !- Name
> Smooth, !- Roughness
> 0.04, !- Thickness {m}
> 0.038, !- Conductivity {W/m-K}
> 9, !- Density {kg/m3}
> 1450, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BguR Stahlbeton, !- Name
> MediumRough, !- Roughness
> 0.2, !- Thickness {m}
> 1.8, !- Conductivity {W/m-K}
> 2400, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> BguR Schichtex, !- Name
> Smooth, !- Roughness
> 0.12, !- Thickness {m}
> 0.125, !- Conductivity {W/m-K}
> 600, !- Density {kg/m3}
> 2100, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Dach Lamitherm , !- Name
> MediumRough, !- Roughness
> 0.24, !- Thickness {m}
> 0.038, !- Conductivity {W/m-K}
> 20, !- Density {kg/m3}
> 1450, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Dach Holz, !- Name
> Rough, !- Roughness
> 0.05, !- Thickness {m}
> 0.13, !- Conductivity {W/m-K}
> 700, !- Density {kg/m3}
> 1600, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0, !- Solar Absorptance
> 0; !- Visible Absorptance
>
>Material,
> Dach Ziegel, !- Name
> Rough, !- Roughness
> 0.02, !- Thickness {m}
> 1, !- Conductivity {W/m-K}
> 2000, !- Density {kg/m3}
> 1000, !- Specific Heat {J/kg-K}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>
>!- =========== ALL OBJECTS IN CLASS: MATERIAL:NOMASS ===========
>
>Material:NoMass,
> Aw Wu innen, !- Name
> Smooth, !- Roughness
> 0.125, !- Thermal Resistance {m2-K/W}
> 0.9000000, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Aw Wu aussen, !- Name
> Rough, !- Roughness
> 0.5, !- Thermal Resistance {m2-K/W}
> 0.9000000, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Iw Wu innen, !- Name
> Smooth, !- Roughness
> 0.125, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Iw Wu aussen, !- Name
> MediumSmooth, !- Roughness
> 0.04, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> BgE Wu innen, !- Name
> MediumSmooth, !- Roughness
> 0.72, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> BguR Wu innen, !- Name
> Smooth, !- Roughness
> 0.167, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> BguR Wu aussen, !- Name
> MediumSmooth, !- Roughness
> 0.167, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Dach Wu innen, !- Name
> MediumSmooth, !- Roughness
> 0.125, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Dach Wu aussen, !- Name
> Rough, !- Roughness
> 0.05, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> BgE Wu aussen, !- Name
> MediumRough, !- Roughness
> 0.001, !- Thermal Resistance {m2-K/W}
> 0.9, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>Material:NoMass,
> Ceiling perfect, !- Name
> VerySmooth, !- Roughness
> 0.001, !- Thermal Resistance {m2-K/W}
> 0.001, !- Thermal Absorptance
> 0.7, !- Solar Absorptance
> 0.7; !- Visible Absorptance
>
>
>!- =========== ALL OBJECTS IN CLASS: WINDOWMATERIAL:SIMPLEGLAZINGSYSTEM ===========
>
>WindowMaterial:SimpleGlazingSystem,
> window, !- Name
> 1.6, !- U-Factor {W/m2-K}
> 0.6; !- Solar Heat Gain Coefficient
>
>
>!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION ===========
>
>Construction,
> Aussenwand, !- Name
> Aw Wu aussen, !- Outside Layer
> Aw Aussenputz, !- Layer 2
> Aw Lamitherm , !- Layer 3
> Aw Modulbackstein, !- Layer 4
> Aw innenputz, !- Layer 5
> Aw Wu innen; !- Layer 6
>
>Construction,
> Innenwand Treppe, !- Name
> Iw Wu aussen, !- Outside Layer
> Iw Verputz aussen, !- Layer 2
> Iw Modulbackstein, !- Layer 3
> Iw Verputz innen, !- Layer 4
> Iw Wu innen; !- Layer 5
>
>Construction,
> Bodenflaeche g. Erdreich,!- Name
> BgE Misapor, !- Outside Layer
> BgE Betonplatten, !- Layer 2
> BgE Flumroc, !- Layer 3
> BgE Wu innen; !- Layer 4
>
>Construction,
> Bodenflaeche g. unb. Raeume, !- Name
> BguR Wu aussen, !- Outside Layer
> BguR Schichtex, !- Layer 2
> BguR Stahlbeton, !- Layer 3
> BguG Trittschaldpl, !- Layer 4
> BguR Zementmörtel, !- Layer 5
> BguR Wu innen; !- Layer 6
>
>Construction,
> Dach, !- Name
> Dach Wu aussen, !- Outside Layer
> Dach Ziegel, !- Layer 2
> Dach Holz, !- Layer 3
> Dach Lamitherm , !- Layer 4
> Dach Wu innen; !- Layer 5
>
>Construction,
> Ceiling, !- Name
> Ceiling perfect; !- Outside Layer
>
>Construction,
> Window, !- Name
> window; !- Outside Layer
>
>
>!- =========== ALL OBJECTS IN CLASS: CONSTRUCTION:INTERNALSOURCE ===========
>
>Construction:InternalSource,
> BodenEG with IS, !- Name
> 3, !- Source Present After Layer Number
> 3, !- Temperature Calculation Requested After Layer Number
> 2, !- Dimensions for the CTF Calculation
> 0.3, !- Tube Spacing {m}
> BgE Misapor, !- Outside Layer
> BgE Betonplatten, !- Layer 2
> BgE Flumroc, !- Layer 3
> BgE Wu innen; !- Layer 4
>
>Construction:InternalSource,
> BodenOG with IS, !- Name
> 5, !- Source Present After Layer Number
> 5, !- Temperature Calculation Requested After Layer Number
> 2, !- Dimensions for the CTF Calculation
> 0.3, !- Tube Spacing {m}
> BguR Wu aussen, !- Outside Layer
> BguR Schichtex, !- Layer 2
> BguR Stahlbeton, !- Layer 3
> BguG Trittschaldpl, !- Layer 4
> BguR Zementmörtel, !- Layer 5
> BguR Wu innen; !- Layer 6
>
>
>!- =========== ALL OBJECTS IN CLASS: GLOBALGEOMETRYRULES ===========
>
>GlobalGeometryRules,
> UpperLeftCorner, !- Starting Vertex Position
> CounterClockWise, !- Vertex Entry Direction
> Relative; !- Coordinate System
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONE ===========
>
>Zone,
> EG Zone, !- Name
> 0, !- Direction of Relative North {deg}
> 0, !- X Origin {m}
> 0, !- Y Origin {m}
> 0, !- Z Origin {m}
> 1, !- Type
> 1, !- Multiplier
> autocalculate, !- Ceiling Height {m}
> autocalculate; !- Volume {m3}
>
>Zone,
> UG Zone, !- Name
> 0, !- Direction of Relative North {deg}
> 0, !- X Origin {m}
> 0, !- Y Origin {m}
> 0, !- Z Origin {m}
> 1, !- Type
> 1, !- Multiplier
> autocalculate, !- Ceiling Height {m}
> autocalculate, !- Volume {m3}
> , !- Zone Inside Convection Algorithm
> , !- Zone Outside Convection Algorithm
> Yes; !- Part of Total Floor Area
>
>Zone,
> OG Zone, !- Name
> 0, !- Direction of Relative North {deg}
> 0, !- X Origin {m}
> 0, !- Y Origin {m}
> 0, !- Z Origin {m}
> 1, !- Type
> 1, !- Multiplier
> autocalculate, !- Ceiling Height {m}
> autocalculate, !- Volume {m3}
> , !- Zone Inside Convection Algorithm
> , !- Zone Outside Convection Algorithm
> Yes; !- Part of Total Floor Area
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONELIST ===========
>
>ZoneList,
> house_susten, !- Zone List Name
> EG Zone, !- Zone 1 Name
> UG Zone, !- Zone 2 Name
> OG Zone; !- Zone 3 Name
>
>ZoneList,
> EG and OG, !- Zone List Name
> EG Zone, !- Zone 1 Name
> OG Zone; !- Zone 2 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: BUILDINGSURFACE:DETAILED ===========
>
>BuildingSurface:Detailed,
> EG:Wall001, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 0, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall002, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall003, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall004, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 9.82, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall005, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 9.82, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 4.6, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 4.6, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall006, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 4.6, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 4.6, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 4.6, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 4.6, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall007, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 4.6, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 4.6, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall008, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall009, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 0, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 0, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Wall010, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> 0.5000000, !- View Factor to Ground
> 4, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 0, !- Vertex 3 X-coordinate {m}
> 0, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 0, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Floor_unb, !- Name
> Floor, !- Surface Type
> BodenOG with IS, !- Construction Name
> EG Zone, !- Zone Name
> Surface, !- Outside Boundary Condition
> UG:Ceiling_keller, !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 8, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 4.6, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 4.6, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 0, !- Vertex 4 Z-coordinate {m}
> 9.82, !- Vertex 5 X-coordinate {m}
> 11.77, !- Vertex 5 Y-coordinate {m}
> 0, !- Vertex 5 Z-coordinate {m}
> 9.82, !- Vertex 6 X-coordinate {m}
> 9.25, !- Vertex 6 Y-coordinate {m}
> 0, !- Vertex 6 Z-coordinate {m}
> 12.65, !- Vertex 7 X-coordinate {m}
> 9.25, !- Vertex 7 Y-coordinate {m}
> 0, !- Vertex 7 Z-coordinate {m}
> 12.65, !- Vertex 8 X-coordinate {m}
> 5.6, !- Vertex 8 Y-coordinate {m}
> 0; !- Vertex 8 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Floor_erd, !- Name
> Floor, !- Surface Type
> BodenEG with IS, !- Construction Name
> EG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 4, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall001, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 6.47, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 0, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 6.47; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall002, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 6.47, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 5.86; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall003, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 5.24, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 5.24; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall004, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 5.24, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 5.86; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall005, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 5.86, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 0, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 0, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 5.86; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall006, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 5.86, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 0, !- Vertex 3 X-coordinate {m}
> 0, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 0, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 6.47; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Floor, !- Name
> Floor, !- Surface Type
> BodenOG with IS, !- Construction Name
> OG Zone, !- Zone Name
> Surface, !- Outside Boundary Condition
> EG:Ceiling, !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 6, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 0, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94, !- Vertex 4 Z-coordinate {m}
> 12.65, !- Vertex 5 X-coordinate {m}
> 9.25, !- Vertex 5 Y-coordinate {m}
> 2.94, !- Vertex 5 Z-coordinate {m}
> 12.65, !- Vertex 6 X-coordinate {m}
> 0, !- Vertex 6 Y-coordinate {m}
> 2.94; !- Vertex 6 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Roof_hoch, !- Name
> Roof, !- Surface Type
> Dach, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 6.47, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 6.47, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> 5.86, !- Vertex 3 Z-coordinate {m}
> 0, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 5.86; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall001, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall002, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall003, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall004, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 9.82, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall005, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 9.82, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 1.32, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> -1.45, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 18.09, !- Vertex 3 Y-coordinate {m}
> -1.45, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 18.09, !- Vertex 4 Y-coordinate {m}
> 1.32; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall006, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 9.82, !- Vertex 1 X-coordinate {m}
> 18.09, !- Vertex 1 Y-coordinate {m}
> 1.32, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 18.09, !- Vertex 2 Y-coordinate {m}
> -1.45, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 18.09, !- Vertex 3 Y-coordinate {m}
> -1.45, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 18.09, !- Vertex 4 Y-coordinate {m}
> 1.32; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall007, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 18.09, !- Vertex 1 Y-coordinate {m}
> 1.32, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 18.09, !- Vertex 2 Y-coordinate {m}
> -1.45, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> -1.45, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 1.32; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall008, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 2.65, !- Vertex 3 X-coordinate {m}
> 5.6, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 5.6, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall009, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> -1.45, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> -1.45; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Wall010, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Zone, !- Outside Boundary Condition
> EG Zone, !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 1.32, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 1.32; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Floor_keller, !- Name
> Floor, !- Surface Type
> Bodenflaeche g. Erdreich,!- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 6, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> -2.75, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> -2.75, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> -2.75, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> -2.75, !- Vertex 4 Z-coordinate {m}
> 12.65, !- Vertex 5 X-coordinate {m}
> 9.25, !- Vertex 5 Y-coordinate {m}
> -2.75, !- Vertex 5 Z-coordinate {m}
> 12.65, !- Vertex 6 X-coordinate {m}
> 5.6, !- Vertex 6 Y-coordinate {m}
> -2.75; !- Vertex 6 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Floor_garage, !- Name
> Floor, !- Surface Type
> Bodenflaeche g. Erdreich,!- Construction Name
> UG Zone, !- Zone Name
> Ground, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 4, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> -1.45, !- Vertex 1 Z-coordinate {m}
> 2.65, !- Vertex 2 X-coordinate {m}
> 18.09, !- Vertex 2 Y-coordinate {m}
> -1.45, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 18.09, !- Vertex 3 Y-coordinate {m}
> -1.45, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> -1.45; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Roof_garage, !- Name
> Roof, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 11.77, !- Vertex 1 Y-coordinate {m}
> 1.32, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 11.77, !- Vertex 2 Y-coordinate {m}
> 1.32, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 18.09, !- Vertex 3 Y-coordinate {m}
> 1.32, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 18.09, !- Vertex 4 Y-coordinate {m}
> 1.32; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Roof_eingang, !- Name
> Roof, !- Surface Type
> Aussenwand, !- Construction Name
> EG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 4.6, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 9.82, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 9.82, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 4.6, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Roof_bei_eingang, !- Name
> Roof, !- Surface Type
> Aussenwand, !- Construction Name
> UG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 9.25, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 4.6, !- Vertex 2 X-coordinate {m}
> 9.25, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 4.6, !- Vertex 3 X-coordinate {m}
> 11.77, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 11.77, !- Vertex 4 Y-coordinate {m}
> 0; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> EG:Ceiling, !- Name
> Ceiling, !- Surface Type
> BodenOG with IS, !- Construction Name
> EG Zone, !- Zone Name
> Surface, !- Outside Boundary Condition
> OG:Floor, !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 6, !- Number of Vertices
> 0, !- Vertex 1 X-coordinate {m}
> 0, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 0, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 2.94, !- Vertex 4 Z-coordinate {m}
> 2.65, !- Vertex 5 X-coordinate {m}
> 5.6, !- Vertex 5 Y-coordinate {m}
> 2.94, !- Vertex 5 Z-coordinate {m}
> 0, !- Vertex 6 X-coordinate {m}
> 5.6, !- Vertex 6 Y-coordinate {m}
> 2.94; !- Vertex 6 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Roof_tief, !- Name
> Roof, !- Surface Type
> Dach, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 5.86, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 5.86, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 5.24, !- Vertex 3 Z-coordinate {m}
> 2.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 5.24; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> OG:Wall007, !- Name
> Wall, !- Surface Type
> Aussenwand, !- Construction Name
> OG Zone, !- Zone Name
> Outdoors, !- Outside Boundary Condition
> , !- Outside Boundary Condition Object
> SunExposed, !- Sun Exposure
> WindExposed, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> autocalculate, !- Number of Vertices
> 12.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 5.86, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 12.65, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 5.24; !- Vertex 4 Z-coordinate {m}
>
>BuildingSurface:Detailed,
> UG:Ceiling_Keller, !- Name
> Ceiling, !- Surface Type
> BodenOG with IS, !- Construction Name
> UG Zone, !- Zone Name
> Surface, !- Outside Boundary Condition
> EG:Floor_erd, !- Outside Boundary Condition Object
> NoSun, !- Sun Exposure
> NoWind, !- Wind Exposure
> autocalculate, !- View Factor to Ground
> 8, !- Number of Vertices
> 2.65, !- Vertex 1 X-coordinate {m}
> 5.6, !- Vertex 1 Y-coordinate {m}
> 0, !- Vertex 1 Z-coordinate {m}
> 12.65, !- Vertex 2 X-coordinate {m}
> 5.6, !- Vertex 2 Y-coordinate {m}
> 0, !- Vertex 2 Z-coordinate {m}
> 12.65, !- Vertex 3 X-coordinate {m}
> 9.25, !- Vertex 3 Y-coordinate {m}
> 0, !- Vertex 3 Z-coordinate {m}
> 9.82, !- Vertex 4 X-coordinate {m}
> 9.25, !- Vertex 4 Y-coordinate {m}
> 0, !- Vertex 4 Z-coordinate {m}
> 9.82, !- Vertex 5 X-coordinate {m}
> 11.77, !- Vertex 5 Y-coordinate {m}
> 0, !- Vertex 5 Z-coordinate {m}
> 4.6, !- Vertex 6 X-coordinate {m}
> 11.77, !- Vertex 6 Y-coordinate {m}
> 0, !- Vertex 6 Z-coordinate {m}
> 4.6, !- Vertex 7 X-coordinate {m}
> 9.25, !- Vertex 7 Y-coordinate {m}
> 0, !- Vertex 7 Z-coordinate {m}
> 2.65, !- Vertex 8 X-coordinate {m}
> 9.25, !- Vertex 8 Y-coordinate {m}
> 0; !- Vertex 8 Z-coordinate {m}
>
>
>!- =========== ALL OBJECTS IN CLASS: WINDOW ===========
>
>Window,
> ost_og_wall2_links, !- Name
> Window, !- Construction Name
> OG:Wall002, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 2.5, !- Starting X Coordinate {m}
> 0.85, !- Starting Z Coordinate {m}
> 0.8, !- Length {m}
> 1.3; !- Height {m}
>
>Window,
> ost_og_wall2_rechts, !- Name
> Window, !- Construction Name
> OG:Wall007, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 0.9, !- Starting X Coordinate {m}
> 0.85, !- Starting Z Coordinate {m}
> 2.1, !- Length {m}
> 1.3; !- Height {m}
>
>Window,
> ost_eg_wall2_links, !- Name
> Window, !- Construction Name
> EG:Wall002, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 3, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 0.8, !- Length {m}
> 2.2; !- Height {m}
>
>Window,
> ost_eg_wall2_rechts, !- Name
> Window, !- Construction Name
> EG:Wall002, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 6.5, !- Starting X Coordinate {m}
> 1.45, !- Starting Z Coordinate {m}
> 2, !- Length {m}
> 0.7; !- Height {m}
>
>Window,
> ost_eg_wall4, !- Name
> Window, !- Construction Name
> EG:Wall004, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 0.7, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 0.8, !- Length {m}
> 2.2; !- Height {m}
>
>Window,
> ost_ug_garage, !- Name
> Window, !- Construction Name
> UG:Wall005, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 2, !- Starting X Coordinate {m}
> 1.5, !- Starting Z Coordinate {m}
> 1.8, !- Length {m}
> 0.6; !- Height {m}
>
>Window,
> nord_og_wall3, !- Name
> Window, !- Construction Name
> OG:Wall003, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 6, !- Starting X Coordinate {m}
> 0.8, !- Starting Z Coordinate {m}
> 0.8, !- Length {m}
> 1.2; !- Height {m}
>
>Window,
> nord_eg_wall3, !- Name
> Window, !- Construction Name
> EG:Wall003, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 1, !- Starting X Coordinate {m}
> 0.5, !- Starting Z Coordinate {m}
> 1.2, !- Length {m}
> 2; !- Height {m}
>
>Window,
> nord_eg_wall5, !- Name
> Window, !- Construction Name
> EG:Wall005, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 3, !- Starting X Coordinate {m}
> 1.5, !- Starting Z Coordinate {m}
> 1.8, !- Length {m}
> 0.6; !- Height {m}
>
>Window,
> west_og_wall4_links, !- Name
> Window, !- Construction Name
> OG:Wall004, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 0.3, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 1.44, !- Length {m}
> 0.8; !- Height {m}
>
>Window,
> west_og_wall4_rechts, !- Name
> Window, !- Construction Name
> OG:Wall004, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 1.8, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 0.8, !- Length {m}
> 2.4; !- Height {m}
>
>Window,
> west_og_wall6, !- Name
> Window, !- Construction Name
> OG:Wall006, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 2, !- Starting X Coordinate {m}
> 0.8, !- Starting Z Coordinate {m}
> 0.96, !- Length {m}
> 1.3; !- Height {m}
>
>Window,
> west_eg_wall10, !- Name
> Window, !- Construction Name
> EG:Wall010, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 2, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 3.26, !- Length {m}
> 2.2; !- Height {m}
>
>Window,
> nord_og_wall1_links, !- Name
> Window, !- Construction Name
> OG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 1.5, !- Starting X Coordinate {m}
> 0.2, !- Starting Z Coordinate {m}
> 1, !- Length {m}
> 1.94; !- Height {m}
>
>Window,
> nord_og_wall1_mitte, !- Name
> Window, !- Construction Name
> OG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 4, !- Starting X Coordinate {m}
> 0.2, !- Starting Z Coordinate {m}
> 2.5, !- Length {m}
> 1.94; !- Height {m}
>
>Window,
> nord_og_wall1_rechtsklein, !- Name
> Window, !- Construction Name
> OG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 7.8, !- Starting X Coordinate {m}
> 0.8, !- Starting Z Coordinate {m}
> 0.6, !- Length {m}
> 1.3; !- Height {m}
>
>Window,
> nord_og_wall1_rechts, !- Name
> Window, !- Construction Name
> OG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 8.8, !- Starting X Coordinate {m}
> 0.2, !- Starting Z Coordinate {m}
> 2.5, !- Length {m}
> 1.94; !- Height {m}
>
>Window,
> nord_eg_wall1_links, !- Name
> Window, !- Construction Name
> EG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 0.3, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 3.4, !- Length {m}
> 2.2; !- Height {m}
>
>Window,
> nord_eg_wall1_mitte, !- Name
> Window, !- Construction Name
> EG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 4.8, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 3.5, !- Length {m}
> 2.2; !- Height {m}
>
>Window,
> nord_eg_wall1_rechts, !- Name
> Window, !- Construction Name
> EG:Wall001, !- Building Surface Name
> , !- Shading Control Name
> , !- Frame and Divider Name
> 1, !- Multiplier
> 9.5, !- Starting X Coordinate {m}
> 0.1, !- Starting Z Coordinate {m}
> 1.96, !- Length {m}
> 2.2; !- Height {m}
>
>
>!- =========== ALL OBJECTS IN CLASS: INTERNALMASS ===========
>
>InternalMass,
> internal_mass_UG, !- Name
> Innenwand Treppe, !- Construction Name
> UG Zone, !- Zone Name
> 0.7; !- Surface Area {m2}
>
>InternalMass,
> internal_mass_EG, !- Name
> Innenwand Treppe, !- Construction Name
> EG Zone, !- Zone Name
> 0.525; !- Surface Area {m2}
>
>InternalMass,
> internal_mass_OG, !- Name
> Innenwand Treppe, !- Construction Name
> OG Zone, !- Zone Name
> 1.5; !- Surface Area {m2}
>
>
>!- =========== ALL OBJECTS IN CLASS: SHADING:SITE:DETAILED ===========
>
>Shading:Site:Detailed,
> vordach_schatten, !- Name
> , !- Transmittance Schedule Name
> 4, !- Number of Vertices
> 3.8, !- Vertex 1 X-coordinate {m}
> -3.66, !- Vertex 1 Y-coordinate {m}
> 2.94, !- Vertex 1 Z-coordinate {m}
> 12, !- Vertex 2 X-coordinate {m}
> -3.66, !- Vertex 2 Y-coordinate {m}
> 2.94, !- Vertex 2 Z-coordinate {m}
> 12, !- Vertex 3 X-coordinate {m}
> 0, !- Vertex 3 Y-coordinate {m}
> 2.94, !- Vertex 3 Z-coordinate {m}
> 3.8, !- Vertex 4 X-coordinate {m}
> 0, !- Vertex 4 Y-coordinate {m}
> 2.94; !- Vertex 4 Z-coordinate {m}
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONEINFILTRATION:DESIGNFLOWRATE ===========
>
>ZoneInfiltration:DesignFlowRate,
> Zone Durchfluss EG, !- Name
> EG Zone, !- Zone or ZoneList Name
> Baseboard Operation Schedule, !- Schedule Name
> Flow/Zone, !- Design Flow Rate Calculation Method
> 0.026903, !- Design Flow Rate {m3/s}
> , !- Flow per Zone Floor Area {m3/s-m2}
> , !- Flow per Exterior Surface Area {m3/s-m2}
> , !- Air Changes per Hour
> 0, !- Constant Term Coefficient
> 0, !- Temperature Term Coefficient
> 0.2237, !- Velocity Term Coefficient
> 0; !- Velocity Squared Term Coefficient
>
>ZoneInfiltration:DesignFlowRate,
> Zone Durchfluss OG, !- Name
> OG Zone, !- Zone or ZoneList Name
> Baseboard Operation Schedule, !- Schedule Name
> Flow/Zone, !- Design Flow Rate Calculation Method
> 0.028159, !- Design Flow Rate {m3/s}
> , !- Flow per Zone Floor Area {m3/s-m2}
> , !- Flow per Exterior Surface Area {m3/s-m2}
> , !- Air Changes per Hour
> 0, !- Constant Term Coefficient
> 0, !- Temperature Term Coefficient
> 0.2237, !- Velocity Term Coefficient
> 0; !- Velocity Squared Term Coefficient
>
>
>!- =========== ALL OBJECTS IN CLASS: SIZING:ZONE ===========
>
>Sizing:Zone,
> EG Zone, !- Zone Name
> 14, !- Zone Cooling Design Supply Air Temperature {C}
> 30, !- Zone Heating Design Supply Air Temperature {C}
> 0.009, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air}
> 0.009, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air}
> Flow/Person, !- Outdoor Air Method
> 0.00944, !- Outdoor Air Flow per Person {m3/s}
> , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
> , !- Outdoor Air Flow per Zone {m3/s}
> , !- Zone Heating Sizing Factor
> , !- Zone Cooling Sizing Factor
> DesignDay, !- Cooling Design Air Flow Method
> , !- Cooling Design Air Flow Rate {m3/s}
> 0.000762, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
> , !- Cooling Minimum Air Flow {m3/s}
> , !- Cooling Minimum Air Flow Fraction
> DesignDay, !- Heating Design Air Flow Method
> , !- Heating Design Air Flow Rate {m3/s}
> 0.002032, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
> 0.1415762, !- Heating Maximum Air Flow {m3/s}
> 0.3; !- Heating Maximum Air Flow Fraction
>
>Sizing:Zone,
> OG Zone, !- Zone Name
> 14, !- Zone Cooling Design Supply Air Temperature {C}
> 30, !- Zone Heating Design Supply Air Temperature {C}
> 0.009, !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air}
> 0.009, !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air}
> Flow/Person, !- Outdoor Air Method
> 0.00944, !- Outdoor Air Flow per Person {m3/s}
> , !- Outdoor Air Flow per Zone Floor Area {m3/s-m2}
> , !- Outdoor Air Flow per Zone {m3/s}
> , !- Zone Heating Sizing Factor
> , !- Zone Cooling Sizing Factor
> DesignDay, !- Cooling Design Air Flow Method
> , !- Cooling Design Air Flow Rate {m3/s}
> 0.000762, !- Cooling Minimum Air Flow per Zone Floor Area {m3/s-m2}
> , !- Cooling Minimum Air Flow {m3/s}
> , !- Cooling Minimum Air Flow Fraction
> DesignDay, !- Heating Design Air Flow Method
> , !- Heating Design Air Flow Rate {m3/s}
> 0.002032, !- Heating Maximum Air Flow per Zone Floor Area {m3/s-m2}
> 0.1415762, !- Heating Maximum Air Flow {m3/s}
> 0.3; !- Heating Maximum Air Flow Fraction
>
>
>!- =========== ALL OBJECTS IN CLASS: SIZING:PLANT ===========
>
>Sizing:Plant,
> plant_bodenheizung, !- Plant or Condenser Loop Name
> Heating, !- Loop Type
> 90, !- Design Loop Exit Temperature {C}
> 20; !- Loop Design Temperature Difference {deltaC}
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONECONTROL:THERMOSTAT ===========
>
>ZoneControl:Thermostat,
> Zone One Control, !- Name
> EG and OG, !- Zone or ZoneList Name
> Zone One Control Type Schedule, !- Control Type Schedule Name
> ThermostatSetpoint:SingleHeating, !- Control 1 Object Type
> Single Heating; !- Control 1 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: THERMOSTATSETPOINT:SINGLEHEATING ===========
>
>ThermostatSetpoint:SingleHeating,
> Single Heating, !- Name
> Heating Setpoint Schedule; !- Setpoint Temperature Schedule Name
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:LOWTEMPERATURERADIANT:VARIABLEFLOW ===========
>
>ZoneHVAC:LowTemperatureRadiant:VariableFlow,
> bodenheizung, !- Name
> Baseboard Operation Schedule, !- Availability Schedule Name
> EG Zone, !- Zone Name
> EG:Floor_erd, !- Surface Name or Radiant Surface Group Name
> 0.013, !- Hydronic Tubing Inside Diameter {m}
> 60, !- Hydronic Tubing Length {m}
> OperativeTemperature, !- Temperature Control Type
> 0.2, !- Maximum Hot Water Flow {m3/s}
> boden_in, !- Heating Water Inlet Node Name
> boden_out, !- Heating Water Outlet Node Name
> 0.5, !- Heating Control Throttling Range {deltaC}
> Baseboard Operation Schedule, !- Heating Control Temperature Schedule Name
> , !- Maximum Cold Water Flow {m3/s}
> , !- Cooling Water Inlet Node Name
> , !- Cooling Water Outlet Node Name
> , !- Cooling Control Throttling Range {deltaC}
> , !- Cooling Control Temperature Schedule Name
> SimpleOff, !- Condensation Control Type
> 1; !- Condensation Control Dewpoint Offset {C}
>
>ZoneHVAC:LowTemperatureRadiant:VariableFlow,
> bodenheizung2, !- Name
> Baseboard Operation Schedule, !- Availability Schedule Name
> OG Zone, !- Zone Name
> OG:Floor, !- Surface Name or Radiant Surface Group Name
> 0.013, !- Hydronic Tubing Inside Diameter {m}
> 100, !- Hydronic Tubing Length {m}
> OperativeTemperature, !- Temperature Control Type
> 0.2, !- Maximum Hot Water Flow {m3/s}
> boden_in2, !- Heating Water Inlet Node Name
> boden_out2, !- Heating Water Outlet Node Name
> 0.5, !- Heating Control Throttling Range {deltaC}
> Baseboard Operation Schedule, !- Heating Control Temperature Schedule Name
> , !- Maximum Cold Water Flow {m3/s}
> , !- Cooling Water Inlet Node Name
> , !- Cooling Water Outlet Node Name
> , !- Cooling Control Throttling Range {deltaC}
> , !- Cooling Control Temperature Schedule Name
> SimpleOff, !- Condensation Control Type
> 1; !- Condensation Control Dewpoint Offset {C}
>
>ZoneHVAC:LowTemperatureRadiant:VariableFlow,
> bodenheizung3, !- Name
> Baseboard Operation Schedule, !- Availability Schedule Name
> EG Zone, !- Zone Name
> EG:Floor_unb, !- Surface Name or Radiant Surface Group Name
> 0.013, !- Hydronic Tubing Inside Diameter {m}
> 40, !- Hydronic Tubing Length {m}
> OperativeTemperature, !- Temperature Control Type
> 0.2, !- Maximum Hot Water Flow {m3/s}
> boden_in3, !- Heating Water Inlet Node Name
> boden_out3, !- Heating Water Outlet Node Name
> 0.5, !- Heating Control Throttling Range {deltaC}
> Baseboard Operation Schedule, !- Heating Control Temperature Schedule Name
> , !- Maximum Cold Water Flow {m3/s}
> , !- Cooling Water Inlet Node Name
> , !- Cooling Water Outlet Node Name
> , !- Cooling Control Throttling Range {deltaC}
> , !- Cooling Control Temperature Schedule Name
> SimpleOff, !- Condensation Control Type
> 1; !- Condensation Control Dewpoint Offset {C}
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTLIST ===========
>
>ZoneHVAC:EquipmentList,
> Equiptment EG Bodenheizung, !- Name
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Zone Equipment 1 Object Type
> bodenheizung, !- Zone Equipment 1 Name
> 1, !- Zone Equipment 1 Cooling Sequence
> 1, !- Zone Equipment 1 Heating or No-Load Sequence
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Zone Equipment 2 Object Type
> bodenheizung3, !- Zone Equipment 2 Name
> 2, !- Zone Equipment 2 Cooling Sequence
> 2; !- Zone Equipment 2 Heating or No-Load Sequence
>
>ZoneHVAC:EquipmentList,
> Equipment OG Bodenheizung, !- Name
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Zone Equipment 1 Object Type
> bodenheizung2, !- Zone Equipment 1 Name
> 1, !- Zone Equipment 1 Cooling Sequence
> 1; !- Zone Equipment 1 Heating or No-Load Sequence
>
>
>!- =========== ALL OBJECTS IN CLASS: ZONEHVAC:EQUIPMENTCONNECTIONS ===========
>
>ZoneHVAC:EquipmentConnections,
> EG Zone, !- Zone Name
> Equiptment EG Bodenheizung, !- Zone Conditioning Equipment List Name
> , !- Zone Air Inlet Node or NodeList Name
> , !- Zone Air Exhaust Node or NodeList Name
> EG Zone Air Node, !- Zone Air Node Name
> EG Zone return outlet; !- Zone Return Air Node Name
>
>ZoneHVAC:EquipmentConnections,
> OG Zone, !- Zone Name
> Equipment OG Bodenheizung, !- Zone Conditioning Equipment List Name
> , !- Zone Air Inlet Node or NodeList Name
> , !- Zone Air Exhaust Node or NodeList Name
> OG Zone Air Node, !- Zone Air Node Name
> OG Zone return outlet; !- Zone Return Air Node Name
>
>
>!- =========== ALL OBJECTS IN CLASS: BRANCH ===========
>
>Branch,
> branch_boiler, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Boiler:HotWater, !- Component 1 Object Type
> bodenheizung_boiler, !- Component 1 Name
> boiler_in, !- Component 1 Inlet Node Name
> boiler_out, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> branch_boden, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Component 1 Object Type
> bodenheizung, !- Component 1 Name
> boden_in, !- Component 1 Inlet Node Name
> boden_out, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> branch_boden2, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Component 1 Object Type
> bodenheizung2, !- Component 1 Name
> boden_in2, !- Component 1 Inlet Node Name
> boden_out2, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> branch_pipe_in, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Pump:VariableSpeed, !- Component 1 Object Type
> pumpe2, !- Component 1 Name
> pumpe_in2, !- Component 1 Inlet Node Name
> pipe_inletin2, !- Component 1 Outlet Node Name
> Active, !- Component 1 Branch Control Type
> Pipe:Adiabatic, !- Component 2 Object Type
> pipe_inlet2, !- Component 2 Name
> pipe_inletin2, !- Component 2 Inlet Node Name
> pipe_inletout2, !- Component 2 Outlet Node Name
> Passive; !- Component 2 Branch Control Type
>
>Branch,
> branch_pipe_out, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Pipe:Adiabatic, !- Component 1 Object Type
> pipe_outlet, !- Component 1 Name
> pipe_outletin, !- Component 1 Inlet Node Name
> pipe_outletout, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> branch_boden3, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> ZoneHVAC:LowTemperatureRadiant:VariableFlow, !- Component 1 Object Type
> bodenheizung3, !- Component 1 Name
> boden_in3, !- Component 1 Inlet Node Name
> boden_out3, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> HS Bypass Branch, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Pipe:Adiabatic, !- Component 1 Object Type
> Heating Supply Bypass, !- Component 1 Name
> bypass_in, !- Component 1 Inlet Node Name
> bypass_out, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> HS Outlet Branch, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Pipe:Adiabatic, !- Component 1 Object Type
> Heating Supply Outlet, !- Component 1 Name
> outletpipe_in, !- Component 1 Inlet Node Name
> outletpipe_out, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>Branch,
> pump_inlet, !- Name
> autosize, !- Maximum Flow Rate {m3/s}
> , !- Pressure Drop Curve Name
> Pump:VariableSpeed, !- Component 1 Object Type
> bodenheizung_pumpe, !- Component 1 Name
> pumpe_in, !- Component 1 Inlet Node Name
> pumpe_out, !- Component 1 Outlet Node Name
> Passive; !- Component 1 Branch Control Type
>
>
>!- =========== ALL OBJECTS IN CLASS: BRANCHLIST ===========
>
>BranchList,
> branch_supply, !- Name
> pump_inlet, !- Branch 1 Name
> branch_boiler, !- Branch 2 Name
> HS Bypass Branch, !- Branch 3 Name
> HS Outlet Branch; !- Branch 4 Name
>
>BranchList,
> branch_demand, !- Name
> branch_pipe_in, !- Branch 1 Name
> branch_boden, !- Branch 2 Name
> branch_boden2, !- Branch 3 Name
> branch_boden3, !- Branch 4 Name
> branch_pipe_out; !- Branch 5 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: CONNECTOR:SPLITTER ===========
>
>Connector:Splitter,
> splitter1, !- Name
> branch_pipe_in, !- Inlet Branch Name
> branch_boden, !- Outlet Branch 1 Name
> branch_boden2, !- Outlet Branch 2 Name
> branch_boden3; !- Outlet Branch 3 Name
>
>Connector:Splitter,
> connector_bypass_split, !- Name
> pump_inlet, !- Inlet Branch Name
> branch_boiler, !- Outlet Branch 1 Name
> HS Bypass Branch; !- Outlet Branch 2 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: CONNECTOR:MIXER ===========
>
>Connector:Mixer,
> connector_mixer, !- Name
> branch_pipe_out, !- Outlet Branch Name
> branch_boden, !- Inlet Branch 1 Name
> branch_boden2, !- Inlet Branch 2 Name
> branch_boden3; !- Inlet Branch 3 Name
>
>Connector:Mixer,
> connector_bypass_mix, !- Name
> HS Outlet Branch, !- Outlet Branch Name
> branch_boiler, !- Inlet Branch 1 Name
> HS Bypass Branch; !- Inlet Branch 2 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: CONNECTORLIST ===========
>
>ConnectorList,
> connectorlist_split1, !- Name
> Connector:Splitter, !- Connector 1 Object Type
> splitter1, !- Connector 1 Name
> Connector:Mixer, !- Connector 2 Object Type
> connector_mixer; !- Connector 2 Name
>
>ConnectorList,
> connectorlist_bypass, !- Name
> Connector:Splitter, !- Connector 1 Object Type
> connector_bypass_split, !- Connector 1 Name
> Connector:Mixer, !- Connector 2 Object Type
> connector_bypass_mix; !- Connector 2 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: PIPE:ADIABATIC ===========
>
>Pipe:Adiabatic,
> pipe_outlet, !- Name
> pipe_outletin, !- Inlet Node Name
> pipe_outletout; !- Outlet Node Name
>
>Pipe:Adiabatic,
> pipe_inlet2, !- Name
> pipe_inletin2, !- Inlet Node Name
> pipe_inletout2; !- Outlet Node Name
>
>Pipe:Adiabatic,
> Heating Supply Bypass, !- Name
> bypass_in, !- Inlet Node Name
> bypass_out; !- Outlet Node Name
>
>Pipe:Adiabatic,
> Heating Supply Outlet, !- Name
> outletpipe_in, !- Inlet Node Name
> outletpipe_out; !- Outlet Node Name
>
>
>!- =========== ALL OBJECTS IN CLASS: PUMP:VARIABLESPEED ===========
>
>Pump:VariableSpeed,
> bodenheizung_pumpe, !- Name
> pumpe_in, !- Inlet Node Name
> pumpe_out, !- Outlet Node Name
> autosize, !- Rated Flow Rate {m3/s}
> 179352, !- Rated Pump Head {Pa}
> autosize, !- Rated Power Consumption {W}
> 0.8, !- Motor Efficiency
> 0, !- Fraction of Motor Inefficiencies to Fluid Stream
> 0, !- Coefficient 1 of the Part Load Performance Curve
> 0, !- Coefficient 2 of the Part Load Performance Curve
> 0, !- Coefficient 3 of the Part Load Performance Curve
> 0, !- Coefficient 4 of the Part Load Performance Curve
> 0, !- Minimum Flow Rate {m3/s}
> Intermittent; !- Pump Control Type
>
>Pump:VariableSpeed,
> pumpe2, !- Name
> pumpe_in2, !- Inlet Node Name
> pipe_inletin2, !- Outlet Node Name
> autosize, !- Rated Flow Rate {m3/s}
> 179352, !- Rated Pump Head {Pa}
> autosize, !- Rated Power Consumption {W}
> 0.8, !- Motor Efficiency
> 0, !- Fraction of Motor Inefficiencies to Fluid Stream
> 0, !- Coefficient 1 of the Part Load Performance Curve
> 0, !- Coefficient 2 of the Part Load Performance Curve
> 0, !- Coefficient 3 of the Part Load Performance Curve
> 0, !- Coefficient 4 of the Part Load Performance Curve
> 0, !- Minimum Flow Rate {m3/s}
> Intermittent; !- Pump Control Type
>
>
>!- =========== ALL OBJECTS IN CLASS: BOILER:HOTWATER ===========
>
>Boiler:HotWater,
> bodenheizung_boiler, !- Name
> Electricity, !- Fuel Type
> 8000, !- Nominal Capacity {W}
> 1, !- Nominal Thermal Efficiency
> , !- Normalized Boiler Efficiency Curve Name
> 30, !- Design Water Outlet Temperature {C}
> autosize, !- Design Water Flow Rate {m3/s}
> 0, !- Minimum Part Load Ratio
> 1.2, !- Maximum Part Load Ratio
> 1, !- Optimum Part Load Ratio
> boiler_in, !- Boiler Water Inlet Node Name
> boiler_out, !- Boiler Water Outlet Node Name
> 99.9, !- Water Outlet Upper Temperature Limit {C}
> VariableFlow, !- Boiler Flow Mode
> , !- Parasitic Electric Load {W}
> 1; !- Sizing Factor
>
>
>!- =========== ALL OBJECTS IN CLASS: PLANTLOOP ===========
>
>PlantLoop,
> plant_bodenheizung, !- Name
> Water, !- Fluid Type
> Hot Loop Operation, !- Plant Equipment Operation Scheme Name
> outletpipe_out, !- Loop Temperature Setpoint Node Name
> 100, !- Maximum Loop Temperature {C}
> 10, !- Minimum Loop Temperature {C}
> autosize, !- Maximum Loop Flow Rate {m3/s}
> 0.0, !- Minimum Loop Flow Rate {m3/s}
> autocalculate, !- Plant Loop Volume {m3}
> pumpe_in, !- Plant Side Inlet Node Name
> outletpipe_out, !- Plant Side Outlet Node Name
> branch_supply, !- Plant Side Branch List Name
> connectorlist_bypass, !- Plant Side Connector List Name
> pumpe_in2, !- Demand Side Inlet Node Name
> pipe_outletout, !- Demand Side Outlet Node Name
> branch_demand, !- Demand Side Branch List Name
> connectorlist_split1, !- Demand Side Connector List Name
> Sequential, !- Load Distribution Scheme
> , !- Availability Manager List Name
> SingleSetpoint, !- Plant Loop Demand Calculation Scheme
> CommonPipe, !- Common Pipe Simulation
> None; !- Pressure Simulation Type
>
>
>!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTLIST ===========
>
>PlantEquipmentList,
> plant_bodenheizung, !- Name
> Boiler:HotWater, !- Equipment 1 Object Type
> bodenheizung_boiler; !- Equipment 1 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATION:HEATINGLOAD ===========
>
>PlantEquipmentOperation:HeatingLoad,
> bodenheizung_heating_control, !- Name
> 0, !- Load Range 1 Lower Limit {W}
> 1000000, !- Load Range 1 Upper Limit {W}
> plant_bodenheizung; !- Range 1 Equipment List Name
>
>
>!- =========== ALL OBJECTS IN CLASS: PLANTEQUIPMENTOPERATIONSCHEMES ===========
>
>PlantEquipmentOperationSchemes,
> Hot Loop Operation, !- Name
> PlantEquipmentOperation:HeatingLoad, !- Control Scheme 1 Object Type
> bodenheizung_heating_control, !- Control Scheme 1 Name
> Baseboard Operation Schedule; !- Control Scheme 1 Schedule Name
>
>
>!- =========== ALL OBJECTS IN CLASS: SETPOINTMANAGER:SCHEDULED ===========
>
>SetpointManager:Scheduled,
> Plant Manager, !- Name
> Temperature, !- Control Variable
> Baseboard Operation Schedule, !- Schedule Name
> outletpipe_out; !- Setpoint Node or NodeList Name
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLEDICTIONARY ===========
>
>Output:VariableDictionary,
> regular; !- Key Field
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:SURFACES:DRAWING ===========
>
>Output:Surfaces:Drawing,
> DXF; !- Report Type
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:CONSTRUCTIONS ===========
>
>Output:Constructions,
> Constructions; !- Details Type 1
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:TABLE:SUMMARYREPORTS ===========
>
>Output:Table:SummaryReports,
> AllSummary; !- Report 1 Name
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUTCONTROL:TABLE:STYLE ===========
>
>OutputControl:Table:Style,
> TabAndHTML; !- Column Separator
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:VARIABLE ===========
>
>Output:Variable,
> *, !- Key Value
> Zone Mean Air Temperature, !- Variable Name
> hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Outdoor Dry Bulb , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Wind Speed , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Diffuse Solar , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Pump Outlet Temp , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Boiler Water Mass Flow Rate , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Boiler Water Outlet Temp , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Plant Loop InletNode Flowrate , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Hydronic Low Temp Radiant Chilled Water Consumption , !- Variable Name
> Hourly; !- Reporting Frequency
>
>Output:Variable,
> *, !- Key Value
> Pump Mass Flow Rate , !- Variable Name
> Hourly; !- Reporting Frequency
>
>
>!- =========== ALL OBJECTS IN CLASS: OUTPUT:SQLITE ===========
>
>Output:SQLite,
> Simple; !- Option Type
>
>
>
>
>
>
>
>------------------------------------
>
>Primary EnergyPlus support is found at:
>http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
>
>The primary EnergyPlus web site is found at:
>http://www.energyplus.gov
>
>The group web site is:
>http://groups.yahoo.com/group/EnergyPlus_Support/
>
>Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
>
>EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
>Yahoo! Groups Links
>
><*> To visit your group on the web, go to:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
><*> Your email settings:
> Individual Email | Traditional
>
><*> To change settings online go to:
> http://groups.yahoo.com/group/EnergyPlus_Support/join
> (Yahoo! ID required)
>
><*> To change settings via email:
> EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
> EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
>
><*> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
><*> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17180)
http://www.pctools.com
=======