[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Limitations in Number of Zones?





Hi Vladimir,

I modeled about 500 zones separetely. I didn't use the multiplier. It was a very big projet about 100000 square meters. I work on it, and every modification add a new zone. For instance it works very well Energy plus, and how I said the problem is open studio. ve

Don"t hesitate if you have questions.

Oscar HERNANDEZ
R&D Engineer
Elithis Group


To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: bajic.vladimir@xxxxxxxxx
Date: Wed, 30 Mar 2011 10:02:50 -0700
Subject: Re: [EnergyPlus_Support] Limitations in Number of Zones?

 

Hi Oscar,

I am not sure if you missed my thank you for your information about modeling 500 zones. I also wanted to know if your 500 zones where unique or total after floor multiplier e.g. 25 zones that are same on 20 floors.

Thank you very much in advance for your time.

Vladimir.



From: oscar hernandez <oscarhernandez_81@xxxxxxxxxxx>
To: energyplus_support@xxxxxxxxxxxxxxx
Sent: Tuesday, March 29, 2011 11:52 AM
Subject: RE: [EnergyPlus_Support] Limitations in Number of Zones?

 
Hi,
 
I modeled a project with more than 500 thermal zones. The problem its not energy plus, its open studio. To open my model in open studio it will be necessary 2 hours.....!!! So I can recommended you to simplify your model.
 
Oscar HERNANDEZ
R&D Engineer
Elithis Group
 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: jim@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Date: Mon, 28 Mar 2011 12:13:50 -0400
Subject: RE: [EnergyPlus_Support] Limitations in Number of Zones?

 
Dear Vladimir,
 
While I do not know the exact number (I think it’s a lot higher than 200), I doubt that you really want to model that many zones without a very good reason.  Keep in mind that zoning in EnergyPlus, or any modeling program, should be selected because of considerations for function and scheduling, solar exposure, and HVAC system type, not by room configuration.
 
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
 
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of bajic.vladimir
Sent: Monday, March 28, 2011 12:02 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Limitations in Number of Zones?
 
 
Does anybody know and have the experience with the maximum number of zones(ballpark) that you can model with Energy Plus.

I did all of my energy modeling with DOE2.1E and that number in DOE2.1E is somewhere from 100 up to 200 depending on the number different system types and in general the complexity of the energy model input.

Thank you in advance,

Vladimir.







__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___





=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17210)
http://www.pctools.com
=======