[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] About the another site's system capacity

hello, every Energyplus user.
I'm a one of enregypluser, and Trying to make GSHP-Lowtemperature Radiant Floor Heating & DHW system.
But in this process, I have some problem and error.
  ** Severe  ** Loads Initialization did not Converge (CheckWarmupConvergence) after 25 warmup days.
   **   ~~~   ** ..Environment=SUMMER DESIGN DAY IN UNTITLED
   **   ~~~   ** ..Max Temp Comparison=0.99 vs Temperature Convergence Tolerance=0.40 - Fail Convergence
   **   ~~~   ** ..Min Temp Comparison=2.27E-004 vs Temperature Convergence Tolerance=0.40 - Pass Convergence
   **   ~~~   ** ..Max Cool Load Comparison=2.7230E-005 vs Loads Convergence Tolerance=4.00E-002 - Pass Convergence
   ************* Beginning Plant Sizing Calculations
I think this error from site difficulty and capacity autosizing method or tight construction.
I have trying a lot of view and method, but I couldn't catch this error.
I want your view and suggestion for this problem.
Thank your for your attention.


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe