It is very simple.
Use the template to create your Heat Pump system for the zone, with an OA mixer. The zone fresh air intake can be controlled.
After it is running properly, estimate how much heat you can recover from the relief air node of the OA mixer.
If it is worth while, add the heat exchanger object manually using the expIDF.
My hunch is that there is very little heat or cool that can be recovered from the OA relief node.
Economizer mode is the way to go.
=============================
Since you have only one zone, the heat pump can be treated as a zone or system equipment. The second air loop is not required.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: themanwho10@xxxxxxxx
Date: Mon, 2 May 2011 12:57:06 +0000
Subject: [EnergyPlus_Support] Re: HVAC Template + HVAC created by the user
I'm not a very experienced user, but what i would like to do is to implement an HVAC Template (Heat Pump Air To Air) in a zone and, in the same zone, a Heat Recovery system (Heat exchanger) which ensure the zone the air exchange.
Is it possible make that directly with the HVAC Template Objects?
or
can i integrate an HVAC Template with a system "created by the user"?
or
I can not use the HVAC Template at all.
Thank you very much for your help,
Thomas
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> If you mean selecting the class object of a "HVAC Template" and a "HVAC system created by the user" at the same time, both for a single zone in an IDF for expansion, the expansion will fail, if the template cannot identify the duplicated objects.
> In my last reply I treated your "supply" as supplying energy to a single zone..
>
> Dr. Li
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: themanwho10@...
> Date: Fri, 29 Apr 2011 16:01:22 +0000
> Subject: [EnergyPlus_Support] HVAC Template + HVAC created by the user
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Is it possible to supply a single zone with a "HVAC Template" and a "HVAC system created by the user" at the same time?
>
Is it possible make that directly with the HVAC Template Objects?
or
can i integrate an HVAC Template with a system "created by the user"?
or
I can not use the HVAC Template at all.
Thank you very much for your help,
Thomas
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> If you mean selecting the class object of a "HVAC Template" and a "HVAC system created by the user" at the same time, both for a single zone in an IDF for expansion, the expansion will fail, if the template cannot identify the duplicated objects.
> In my last reply I treated your "supply" as supplying energy to a single zone..
>
> Dr. Li
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: themanwho10@...
> Date: Fri, 29 Apr 2011 16:01:22 +0000
> Subject: [EnergyPlus_Support] HVAC Template + HVAC created by the user
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Is it possible to supply a single zone with a "HVAC Template" and a "HVAC system created by the user" at the same time?
>
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___