Re: [EnergyPlus_Support] Output Variables WB temp.

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

You can get the system node wet bulb so possibly you could
use the Zone Air Node as indicative of the Indoor Wet Bulb

Otherwise, I think you will have to derive it from the Zone mean Air
Temperature and Zone Air Humidity Ratio or similar.

At 03:07 PM 5/2/2011, Vinay Devanathan wrote:


> Is it possible to output the Indoor Wet-bulb temperature of a zone at
> different times?
>
> Thank you.
>
> Vinay

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___