[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Output Variables WB temp.





Thanks, Brent and Linda!

I was all the while trying to find something through Zone outputs, never thought about system output. I think I can get it easily now.

Thanks again!

On Mon, May 2, 2011 at 5:16 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
 

You can get the system node wet bulb so possibly you could use the Zone Air Node as indicative of the Indoor Wet Bulb

Otherwise, I think you will have to derive it from the Zone mean Air Temperature and Zone Air Humidity Ratio or similar.



At 03:07 PM 5/2/2011, Vinay Devanathan wrote:


Is it possible to output the Indoor Wet-bulb temperature of a zone at different times?

Thank you.

Vinay





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___