The large hotel is a six floor building.
The DXF diagram is correct, showing basement, ground floor, third floor, and top floor.
The third floor probably has a multiplier of four, one below and two above it, and hence the empty floor spaces.
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: alvarofialho@xxxxxxxxx
Date: Thu, 12 May 2011 12:09:29 +0200
Subject: [EnergyPlus_Support] Possible problem with transition-V5-0-0-to-V6-0-0 ? Or with the reference buildings?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: alvarofialho@xxxxxxxxx
Date: Thu, 12 May 2011 12:09:29 +0200
Subject: [EnergyPlus_Support] Possible problem with transition-V5-0-0-to-V6-0-0 ? Or with the reference buildings?
Hello everybody,
I wanted to play a bit with the "Commercial Reference Buildings"
(http://www1.eere.energy.gov/buildings/commercial_initiative/reference_buildings.html),
but the available idf files are for EnergyPlus v5.
I converted them to v6 using the transition-V5-0-0-to-V6-0-0 tool that
comes in the bin folder of the default MacOS EnergyPlus installation. It
seemed to work ok:
alvaro$ /Applications/EnergyPlus-6-0-0/bin/transition-V5-0-0-to-V6-0-0
RefBldgLargeHotelPost1980_v1.3_5.0_5A_USA_IL_CHICAGO-OHARE.idf
Transition Starting
Transition 5.0 => 6.0
Processing Old IDD -- V5-0-0-Energy+.idd
Processing New IDD -- V6-0-0-Energy+.idd
Will create new full IDFs
Will create new IDF lines with units where applicable
Will create new IDF lines leaving blank incoming fields as blank (no
default fill)
Report Variable Name file=Report Variables 5-0-0-031 to 6-0-0.csv
not found.
Processing IDF --
RefBldgLargeHotelPost1980_v1.3_5.0_5A_USA_IL_CHICAGO-OHARE.idf
But when visualizing the resulting DXF file, there are some "gaps"
between the different stores of the building, as you can see in the
figure attached. Exactly the same happened to other big buildings, such
as the LargeOfficePost and the MidRiseAppartment, while for many others
the model was ok.
Would it be a problem with the "transition" tool? Or is it an error that
is already part of the original v5 model? I could verify this on my own,
but I couldn't find where to download previous versions of EnergyPlus.
Thanks in advance,
Álvaro.
I wanted to play a bit with the "Commercial Reference Buildings"
(http://www1.eere.energy.gov/buildings/commercial_initiative/reference_buildings.html),
but the available idf files are for EnergyPlus v5.
I converted them to v6 using the transition-V5-0-0-to-V6-0-0 tool that
comes in the bin folder of the default MacOS EnergyPlus installation. It
seemed to work ok:
alvaro$ /Applications/EnergyPlus-6-0-0/bin/transition-V5-0-0-to-V6-0-0
RefBldgLargeHotelPost1980_v1.3_5.0_5A_USA_IL_CHICAGO-OHARE.idf
Transition Starting
Transition 5.0 => 6.0
Processing Old IDD -- V5-0-0-Energy+.idd
Processing New IDD -- V6-0-0-Energy+.idd
Will create new full IDFs
Will create new IDF lines with units where applicable
Will create new IDF lines leaving blank incoming fields as blank (no
default fill)
Report Variable Name file=Report Variables 5-0-0-031 to 6-0-0.csv
not found.
Processing IDF --
RefBldgLargeHotelPost1980_v1.3_5.0_5A_USA_IL_CHICAGO-OHARE.idf
But when visualizing the resulting DXF file, there are some "gaps"
between the different stores of the building, as you can see in the
figure attached. Exactly the same happened to other big buildings, such
as the LargeOfficePost and the MidRiseAppartment, while for many others
the model was ok.
Would it be a problem with the "transition" tool? Or is it an error that
is already part of the original v5 model? I could verify this on my own,
but I couldn't find where to download previous versions of EnergyPlus.
Thanks in advance,
Álvaro.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___