[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Arranging columns in output CSV

There is 1 Warning when the file ExerciseOutput1.idf is run. The warning is Warning ** One of the Standard Ratings for Coil:Cooling:DX:SingleSpeed = AHU 1 COOLING COIL could not be calculated, so set to zero in output.
   **   ~~~   **  Review the Standard Ratings calculations in the Engineering Reference for this coil type. Also, use Output:Diagnostics, DisplayExtraWarnings for further guidance.
   **   ~~~   ** CheckCurveLimitsForStandardRatings: The max and/or min limits specified in the corresponding curve objects did not
   **   ~~~   **  allow the curves to be evaluated at the conditions required to calculate one or more of the Standard Rating values.
   **   ~~~   ** Coil:Cooling:DX:SingleSpeed=AHU 1 COOLING COIL:  Integrated Energy Efficiency Ratio (IEER) can not be calculated.
   **   ~~~   **  Check limits in Total Cooling Capacity Function of Temperature Curve , Curve Type = BIQUADRATIC, Curve Name = AHU 1 DX COIL CAP-FT
   **   ~~~   **  Check limits in EIR Function of Temperature Curve, Curve Type = BIQUADRATIC, Curve Name = AHU 1 DX COIL EIR-FT

i am not sure if the above waring has got something to do with the errors shown in the DOS window

May we all be well and happy
ooi

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "ooikoonbeng2004" <ooi_kb3@...> wrote:
>
> i followed your instructions in your "Tips & Tricks". When the .bat file is used at the command (DOS) window, the following is shown
> 
> 1 file(s) copied.
> 1 file(s) copied.
> 
> ===== Extracting Results
> 
> The system cannot find the files specified.
> The system cannot find the files specified.
> The system cannot find the files specified.
> The system cannot find the files specified.
> The system cannot find the files specified.
> 
> The above was done in C:\EnergyPlusv6-0-0-037\ExampleFiles\AdvancedOutput where the idf, rvi and bat files are located. 
> 
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> >
> > use rvi and mvi files.
> > 
> > Described several places in documentation including a "tips & tricks".
> > 
> > At 06:09 AM 5/21/2011, Vaibhav Jain wrote:
> > 
> > >How columns of output CSV files can be arranged in user desired 
> > >order. It is easy to do so.
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/